Genesis 2 Series - General Specifications

3
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will cause
swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl
®
. It is recommended that Dow
Corning
®
silicone grease be used as a lubricant for all control valves.
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended
that Teflon
®
tape be used to seal plastic Noryl
®
threaded fittings.
General
Specifications
GENAIO10
GENAIO15
Filtration Media
Filter Media Capacity (cu ft)
1.0 1.5
Mineral Tank
9 X 48 10 X 54
Service Flow Rate - Continuous (gpm)
4 5
Service Flow Rate - Intermittent (gpm)
6 7
Backwash Flow Rate (gpm)
4 5
Gallons Used / Backwash
86 106
Space Required
9 X 9 X 56 10 X 10 X 62
Approximate Shipping Weight (lbs)
130 145
General Specifications
General
Specifications
GENAIO20 GENAIO25
Filtration Media
CATALYTIC CARBON BLEND
Filter Media Capacity (cu ft)
2.0
2.5
Mineral Tank
12 X 52
13 X 54
Service Flow Rate - Continuous (gpm)
7
8
Service Flow Rate - Intermittent (gpm)
9
10
Backwash Flow Rate (gpm)
7 10
Gallons Used / Backwash
126
146
Space Required
12 X 12 X 60
13 X 13 X 62
Approximate Shipping Weight (lbs)
185
221
CATALYTIC CARBONSMART BLEND
™