Genesis Centauri - User Manual

Genesis Centauri Dive Computer
The Centauri has 4 buttons -
1. The left side upper button is for Power and Exit.
2. The right side upper button is to move up on the screen.
3. The right side middle button is to select the option.
4. The right side lower button is to move down on the screen.
If your computer is powered off, please press and hold left side upper button for three seconds to turn
the computer on.
When the computer powers up you will see the Genesis brand name, then the current version
information and then the home screen.
The home screen shows the battery level, day of the week, time of day and date.
In order to customize the setup of your Centauri follow these steps:
Menu -
Press the right side center button to access the Menu.
The arrow to the left of the Menu options indicates the option which can be selected.
With the arrow to the left of Watch, press the left center button to return to the watch home screen.
Or Press the left side button to return to the home screen.
Press the lower right button to move the arrow to Scuba.
Press the right center button to enter the Scuba mode.
Press the left upper button to exit the Scuba mode.
Press the right lower button to move the arrow to Gauge.
Press the right center button to enter the Gauge mode.
Press the left upper button to exit the Gauge mode.
Press the right lower button to move the arrow to Free.
Press the right center button to enter the Free Dive mode.
Press the left upper button to exit the Free Dive mode.
Press the right lower button to move the arrow to Log.
Press the right center button to enter the Log.
Press the left upper button to exit the Log.

Genesis Centauri Specifications

General

Brand	Genesis
Model	Centauri
Category	Diving Instrument
Language	English

Summary

Genesis Centauri Dive Computer Controls

Button Functionality

Details the function of each of the four physical buttons on the dive computer.

Menu Navigation and Modes

Date and Time Settings Configuration

Setting the Dive Computer Date

Step-by-step instructions for setting the current date, including month, day, and year.

Setting the Dive Computer Time

Instructions for setting the current time, including hour and minute adjustments.

Dive Mode and Personalization Settings

Auto Dive Mode Setup

Nitrox Settings Configuration

Set the percentage of oxygen for Nitrox dives.

PPO2 Setting

Adjust the Partial Pressure of Oxygen (PPO2) setting for dive safety.

Conservative Factor (CF) Setup

Configure the Conservative Factor (CF) for dive planning safety margins.

Dive Alarms and Limits Configuration

Depth Alarm Setup (S-DPTH-ALM)

Configure audible or visual alarms for specific dive depths.

Time Alarm Setup (S-TIME-ALM)

Set up alarms for reaching specific dive time durations.

Maximum Depth Setting (S-MAXDEPTH)

Define the maximum safe diving depth limit.

Maximum Dive Time Setting (S-MAXTIME)

Set the maximum allowed duration for a dive.

Freedive Mode Specific Settings

Freedive Time Alarm (F-TIME-ALM)

Freedive Depth Alarm (F-DEPTH-ALM)

Freedive Safety Indicator (F-SI-ALM)

Freedive Max Time Limits

Freedive Max Depth Limits