02
Vehicles equipped with shoulder
adjustment
• Seat sliding and Seatback angle
Push the control switch (1) forward or
rearward to slide the seat and seat-
back angle to the desired position.
Release the switch once the seat
reaches the desired position.
• Shoulder adjustment 
Push the control switch (2) forward or
rearward to move the shoulder angle
to the desired position. Release the
switch once the seat reaches the
desired position.
Cushion tilt adjustment 
(1, if equipped)
Push the front portion of the control
switch (1) up to raise or down to lower
the front part of the seat cushion.
Lumbar support (if equipped)
The lumbar support can be adjusted
by pressing the lumbar support
switch. Press the front portion of the
switch (1) to increase support or the
rear portion of the switch (2) to
decrease support.
To move the support position up or
down, press the switch (3) or (4).
Easy access switch (if equipped)
• If equipped with IMS system
A rear seat moves slightly rearward,
when a passenger opens a rear door
with the DOOR indicator illuminated.
A rear seat moves slightly forward
when a passenger closes a rear door
with the DOOR indicator illuminated.
To deactivate the easy access func-
tion, press the DOOR switch (indica-
tor OFF).
• If not equipped with IMS
Easy access system always operates.
Do not adjust your seat position
forward while fastening the seat-
belt. It may apply abnormally
high pressure on your abdomen.
Adjust your seat position first,
and then fasten the seatbelt.
WARNING
OHI036083
■ Type A (Sedan)
OHI036084
■ Type B (Limousine)
2-15
OHI036073