5-82
Driving your vehicle
Smart Cruise Control will be
temporarily canceled when:
Cancelled manually
• Depressing the brake pedal.
• Pressing the CANCEL/ button
located on the steering wheel.
• Depress the brake pedal and press
the CANCEL/ button at the
same time, when the vehicle is at a
standstill.
The Advanced Smart Cruise Control
turns off temporarily when the Set
Speed and Vehicle-to-Vehicle
Distance indicator on the LCD dis-
play turns off.
The cruise ( ) indicator is
illuminated continuously.
Cancelled automatically
• The driver's door is opened.
• The shift lever is shifted to N
(Neutral), R (Reverse) or P (Park).
• The EPB (Electonric Parking Brake)
is applied.
• The vehicle speed is over 210
km/h (130 mph)
• The vehicle stops on a steep
incline.
• The ESC (Electronic Stability
Control), TCS (Traction Control
System) or ABS is operating.
• The ESC is turned off.
• The sensor or the cover is dirty or
blocked with foreign matter.
• When the vehicle is stopped for
more than 5 minutes.
• The vehicle stops and goes repeat-
edly for a long period of time.
• The driver starts driving by pushing
the toggle switch up (RES +)/down
(SET -) or depressing the acceler-
ator pedal, approximately 3 min-
utes after the vehicle is stopped by
the Smart Cruise Control System
with no other vehicle ahead.
• The driver starts driving by pushing
the toggle switch up (RES +)/down
(SET -) or depressing the acceler-
ator pedal, after stopping the vehi-
cle with a vehicle stopped far away
in front.
• The accelerator pedal is continu-
ously depressed for more than one
minute.
OHI056072
To Next Page
Loading...
