8-7
08
Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or
dipstick before checking or draining any lubricant. This is especially
important in dusty or sandy areas and when the vehicle is used on
unpaved roads. Cleaning the plug and dipstick areas will prevent dirt
and grit from entering the engine and other mechanisms that could be
damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weath-
er operating (engine start and engine oil flow ability). Lower viscosity engine
oils can provide better fuel economy and cold weather performance; howev-
er, higher viscosity engine oils are required for satisfactory lubrication in hot
weather. Using oils of any viscosity other than those recommended could
result in engine damage. When choosing an oil, consider the range of temper-
ature your vehicle will be operated in before the next oil change. Proceed to
select the recommended oil viscosity from the chart.
NOTICE
Temperature Range for SAE Viscosity Numbers
Temperature
Gasoline
Engine Oil *
1
*
2
°C
(°F)
-30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
20W-50
10W-30
15W-40
5W-30, 5W-40
*
1
: For better fuel economy, it is recommended to use the engine oil of a viscosity
grade SAE 5W-30. However, if the engine oil is not available in your country, select
the proper engine oil using the engine oil viscosity chart.
*
2
: For the Lambda 3.3 T. GDI / Tau 5.0 GDI, we recommend you to use high-grade
gasoline (above RON 96). You may still use other types of gasoline. However, those
may negatively affect your vehicle power and fuel economy.
To Next Page
Loading...
