Genesis GRT2103-40 - ASSEMBLY AND ADJUSTMENT; Collet and Accessory Installation; Accessory Balancing Procedure

9
English
ASSEMBLY AND ADJUSTMENT
 WARNING: Always be sure that the tool is switched off before adjusting,
adding accessories, or checking a function on the tool .
COLLETS





Always use the collet which
matches the accessory shaft size. Never
force a larger diameter shaft into a collet
To install a different collet


INSTALLING AND REMOVING ACCESSORIES









Do not over tighten or use any tools to tighten
WARNING: DO NOT engage the shaft lock while the tool is running
WARNING: Avoid excessive tightening of the collet nut. Do not over-
tighten the collet nut when no bit is inserted.
BALANCING


To balance an accessory: 






COLLET NUT
COLLET SHAFT
SPINDLE
LOCK
FIG 2