User manual of Kloud Note v2.0 www.geniatech.com
Copyright © 2021 Shenzhen Geniatech Inc, Ltd. All rights reserved.
When the power is on, press and hold the power button for 2-3 seconds,
and select "Power off" in the pop-up menu.
When the power is on, press and hold the power button for 5 seconds to
power off.
When the power is off, connect the TypeC cable to charge, and it will
automatically power on.
11.2 How to charge
Connect the device to the computer via a USB data cable for charging.
Connect the USB cable and the device through the adapter (optional), and
connect to the AC outlet for charging.
Charging time is about 3 hours.
Note:
If the charging status is not displayed when the adapter is connected, please
check whether the default power supply of the adapter is 5V (voltage range:
4.5V-5.4V). If it is not within this range, please replace the adapter and try
again.
11.3 How to transfer data
Connect a mobile phone or computer via a data cable for data transmission.
Connect to WIFI and log in, then download the book in Reader.
To Next Page
Loading...