EasyManua.ls Logo

Genie 3120H-B User Manual

Genie 3120H-B
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
BELT/CHAIN DRIVE GARAGE DOOR OPENER MODELS:
3020H & 3020H-B, 3120H & 3120H-B
PROGRAMMING, OPERATION & MAINTENANCE MANUAL
39517503545 10/2017
STOP
Need help or have questions?
For answers and assistance,
visit www.GenieCompany.com
or call Customer Service at: 1-800-35-GENIE
To reduce the risk of injury to persons or damage to property, use this opener only with a sectional residential door.
WARNING
!
Por reduire le risque de blessures ou de dommages materials, utillsez cet ouvre-porte uniquement pour une porte
a section re sidentielie.
AVERTISSEMENT
!
Alternate language manuals available at:
Idioma alternativo manuales disponibles en:
Autre langue manuels disponibles à:
www.GenieCompany.com
}
SERIAL NUMBER DECAL
iDCM SERIAL NUMBER
Question and Answer IconNeed help?

Do you have a question about the Genie 3120H-B and is the answer not in the manual?

Genie 3120H-B Specifications

General IconGeneral
BrandGenie
Model3120H-B
CategoryGarage Door Opener
LanguageEnglish

Summary

SAFETY NOTIFICATIONS & INSTRUCTIONS

Important Safety Instructions

Lists critical safety instructions for operating garage door openers.

IMPORTANT INSTALLATION INSTRUCTIONS

Electrical Safety and Grounding Warnings

Details safety requirements for electrical connections and grounding.

SAFETY & STANDARD FEATURES

OPENER PROGRAMMING OVERVIEW

PROGRAMMING THE DOWN TRAVEL LIMIT

Setting the Down Travel Limit

Steps to set the door's fully closed position.

PROGRAMMING THE UP TRAVEL LIMIT

Setting the Up Travel Limit

Steps to set the door's fully open position.

FORCE CONTROL AND CONTACT REVERSE

Contact Reverse Test Procedure

Details how to test the door's reversing mechanism with an object.

PROGRAMMING ADDITIONAL REMOTE CONTROLS

Steps for Programming New Remotes

Instructions for programming new remotes or re-programming existing ones.

CRITICAL SAFETY INSTRUCTIONS REITERATED

General Safety Guidelines Review

Reinforces critical safety rules for operating the garage door opener.

Electrical and Hardware Safety Warnings

Details safety requirements for electrical connections and garage door hardware.

MAINTENANCE AND ADJUSTMENTS

TROUBLESHOOTING COMMON PROBLEMS

Opener Not Responding to Controls

Solutions for when the opener doesn't operate from the wall console.

Door Fails to Move or Reverses Unexpectedly

Addresses issues where the door doesn't move or stops/reverses improperly.

Remote Control and Safe-T-Beam® Issues

Solutions for remote control problems and Safe-T-Beam® malfunctions.

POWERHEAD LED TROUBLESHOOTING

Interpreting Powerhead LED Status Codes

Explains LED combinations and their associated problems.

CLEARING REMOTE MEMORY

Erasing All Programmed Remotes

Instructions to clear all programmed remotes from the opener's memory.

WIRELESS KEYPAD PROGRAMMING

Programming Keypad PIN and Single Opener

Steps to set a PIN and link the keypad to one opener.

Programming Keypad for Multiple Openers

Instructions to link the keypad to up to three openers.

DASMA SAFETY INFORMATION

Garage Door Openers Are Not Toys

Emphasizes that openers are not toys and highlights safety risks.

Garage Door System Safety Guidelines

Discusses the importance of proper installation and maintenance for safe operation.

CHILD SAFETY AND MAINTENANCE TIPS

Teaching Children Garage Door Safety

Advice on educating children about garage door safety to prevent accidents.

MONTHLY SAFETY TESTING PROCEDURES

Related product manuals