To Next PageTo Next Page
Need help?Do you have a question about the Genie INTELLIG 1000 3024H and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Max Door Weight | 500 lbs |
| Drive System | Chain Drive |
| Voltage | 120V |
| Frequency | 60 Hz |
| Motor Type | AC |
| Speed | 7 inches per second |
| Battery Backup | No |
| Max Door Height | 7 ft (extendable to 8 ft) |
| Security | Rolling Code Technology |
| Warranty | Lifetime |
| Safety Features | Safe-T-Beam infrared system, UL 325 compliant |
| Remote Control | 2 pre-programmed 3-button remotes |
Explains symbols and signal words used in the manual for hazard identification.
Provides critical safety instructions for operating and maintaining the garage door opener.
Describes the advanced encryption system for enhanced garage door opener security.
Describes the standard wall console unit with its buttons and indicator light.
Information on compatibility with vehicle's built-in remote systems.
Explains the non-contact reversing system that uses an invisible beam across the door opening.
Describes the automatic stop and reverse feature upon contact with an object.
Details the automatic force setting for maximum safety during door operation.
Monitors the Safe-T-Beam® system for proper functionality and safety.
Describes how to manually release the door from the opener for emergencies.
Allows easy adjustment of speed, limits, and force, and programming remotes.
Explains the automatic lighting feature for safer evening exits and entries.
Describes the optional motion sensor for automatic lighting activation.
Explains how the Safe-T-Beam® system functions and reacts to obstructions during operation.
Step-by-step instructions for adjusting door travel limits and force settings.
Specific procedure for setting the downward travel limit of the garage door opener.
Steps for performing the test and adjusting limits if needed.
Instructions for linking vehicle remotes to the garage door opener.
Steps to program older IntelliCode® 1 remotes or wireless keypads.
Explains the function of each button and the meaning of LED colors and patterns.
Details the specific LED color combinations for different programming menus and status.
Procedure to erase all programmed remotes from the powerhead memory.
Compliance information regarding radio frequency emissions for the device.
How to switch between IntelliCode® 1 and 2 modes for remote compatibility.
Steps to program remotes to previously installed IntelliCode® 1 Genie® garage door openers.
Key safety warnings and instructions to follow before performing maintenance or troubleshooting.
Procedure to check if the garage door is properly balanced for safe operation.
Steps for performing the test and adjusting limits if needed.
Explains the function of the Open/Close, Sure-Lock™, and Light Control buttons.
