To Next PageTo Next Page
Need help?Do you have a question about the Genie IntelliG 1200 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | IntelliG 1200 |
| Category | Garage Door Opener |
| Language | English |
Lists the Genie garage door opener models covered by this manual, including various PowerMax, IntelliG, and others.
Specifies the types of drive systems (screw, belt, chain) for Genie garage door openers.
Explains potential hazards associated with garage doors and openers, using safety alert symbols and signal words.
Provides critical safety warnings and precautions for operating and using the garage door opener.
Details crucial safety instructions to follow during the installation process of the garage door opener.
Describes various safety features integrated into the Genie garage door opener system.
Highlights key operational features of the Genie garage door opener, such as Intellicode and wall consoles.
Explains how the Safe-T-Beam system functions to prevent door closure when an obstruction is detected.
Introduces the essential programming steps for setting up the garage door opener for proper operation.
Details the programming buttons, LED indicators, and their functions on the opener's powerhead.
Guides on setting the travel limits for opening and closing the garage door for safe operation.
Specific steps to program the down limits for the garage door to close properly.
Specific steps to program the up limits for the garage door to open fully.
Explains the functions and indicators of the wall console used for opener operation.
Details the features and operation of wall consoles with white buttons.
Details the features and operation of wall consoles with black buttons.
Discusses how force and speed settings are automatically managed for safe door operation.
Procedure to test if the opener reverses correctly upon contact with an obstruction.
Step-by-step instructions for programming Intellicode 2 remotes to the garage door opener.
Instructions for setting up a Personal Identification Number (PIN) for the wireless keypad.
Procedure to erase and reset the PIN for the wireless keypad if forgotten or compromised.
Steps to change the existing PIN for the wireless keypad.
Instructions on how to erase all programmed remotes and keypads from the opener's memory.
Guide for programming Intellicode 1 remotes with older Genie garage door openers.
Instructions for attaching the door bracket to a one-piece garage door.
Steps for connecting the door arm to the door bracket on one-piece doors.
Details the monthly test to ensure the opener reverses correctly on contact.
Procedure to verify the proper functioning of the Safe-T-Beam safety system.
Instructions for checking if the garage door is properly balanced and moves smoothly.
Lists basic monthly maintenance tasks for the garage door opener.
Explains how to engage and disengage the carriage for manual door operation.
Covers procedures for addressing issues such as changing light bulbs and remote battery replacement.
Step-by-step guide for replacing the light bulbs in the garage door opener.
Instructions for replacing the battery in the remote control transmitter.
Provides guidance on adjusting force settings for optimal opener performance.
Detailed steps for adjusting the force settings of the garage door opener.
Instructions for adjusting the travel speed of the opener for sectional doors.
Guidance on correctly positioning Safe-T-Beam sensor pairs for optimal operation.
Diagram illustrating the wiring connections for the power cord and main components.
Addresses common issues preventing the opener from running or the door from moving from the wall console.
Covers further operational issues like noisy operation or slow door movement.
Explains possible problems indicated by the LED lights on the powerhead and their solutions.
Outlines the terms, conditions, and duration of the limited warranty for Genie garage door openers.
Highlights advanced Genie-Net technology wireless remotes for garage door status.
Features GenieMaster 3-Button Remotes for easy operation and compatibility.
Describes Keyless Entry Pads for wireless access and control of garage door openers.
Introduces the Perfect Stop Parking System for safe garage parking guidance.
Mentions the universal wall push button as an additional control option for garages.
