To Next PageTo Next Page
Need help?Do you have a question about the Genie SC 1200 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | SC 1200 |
| Category | Garage Door Opener |
| Language | English |
Explains potential dangers associated with garage door openers.
Critical guidelines to prevent injury or death during operation.
Key steps for safe and correct installation of the opener.
Lists safety mechanisms designed to protect users and property.
Details the functional capabilities and components of the opener.
Explains how the Safe-T-Beam system works and its safety role.
Outlines the importance and process of programming the opener.
Defines key terms like Travel Limits, Remote Programming, Force, and Speed.
Identifies and explains the buttons and LEDs on the opener's powerhead.
Sets the full open and closed positions for the garage door.
Step-by-step guide to setting the door's fully closed position.
Step-by-step guide to setting the door's fully open position.
Describes the functions and indicators of the wall console.
Details the features of Series II wall consoles with white buttons.
Details the features of Series III wall consoles with black buttons.
Explains how force and speed are automatically set during initial operation.
Procedure to verify the door's safety reversal mechanism works correctly.
Steps to correct issues if the contact reverse test fails.
Instructions for programming Intellicode 2 remotes to the opener.
Guides on setting up and synchronizing the wireless keypad.
Covers setting, resetting, and changing the keypad PIN for security.
How to erase all programmed remotes and keypads from the opener.
Instructions for using Intellicode 1 remotes with Intellicode 2 openers.
Steps for installing the bracket onto a one-piece garage door.
Steps for connecting the door arm to the installed bracket.
How to verify the Safe-T-Beam system is functioning correctly.
Procedures to check and ensure the door is properly balanced.
Outlines routine checks like contact reverse, STB, balance, and lubrication.
Addresses issues requiring repair or replacement of components.
Step-by-step guide for replacing the opener's light bulbs.
Instructions for replacing the battery in the remote control.
General information on adjusting opener settings.
Detailed steps for adjusting the force settings for door operation.
Detailed steps for adjusting the speed settings for door operation.
Guidance on positioning the Safe-T-Beam source and sensor for optimal performance.
Addresses issues when the opener fails to run from the wall console.
Troubleshoots problems where the opener operates but the door remains stationary.
Solves problems related to remote range, response, or lack of operation.
Diagnoses and resolves situations where the door stops or reverses unexpectedly.
Addresses issues where the door stops before fully closing or opening.
Troubleshoots instances where the opener activates without command.
Identifies causes and solutions for unusual noise during operation.
Addresses issues related to the opener running slowly or with reduced speed.
Interprets powerhead LED lights to diagnose operational problems.
