Genie Single User Manual

INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
BELT/CHAIN DRIVE GARAGE DOOR OPENERS
PROGRAMMING, OPERATION & MAINTENANCE MANUAL
39786503812, 03/2018
SERIAL NUMBER DECAL
STOP
DO NOT return product to store,
visit www.GenieCompany.com
or call Customer Service at: 1-800-35-GENIE
iDCM SERIAL NUMBER DECAL
To reduce the risk of injury to persons or damage to property, use this opener only with a sectional residential
door.
WARNING
Por reduire le risque de blessures ou de dommages materials, utillsez cet ouvre-porte uniquement pour une porte
a section re sidentielie.
AVERTISSEMENT
!
!
Refer to the assembly poster
for opener assembly and
installation instructions. Return
to this manual for programming,
operation and maintenance.
• SingleBulbModels
• DualBulbModels
• BBUModels
• iDCMModels
• IntegratedLEDlightedModels
DO NOT use photocells from other manufacturers or openers with this opener.

Genie Single Specifications

General

Type	Chain Drive
Horsepower	1/2 HP
Motor Type	AC
Voltage	120V
Remote Control	Yes

Summary

Introduction to Genie Garage Door Openers

Safety Warnings and Cautions

Essential safety warnings and cautions to be read before proceeding with installation.

Genie Garage Door Opener Safety and Features

Programming and Accessory Installation Guide

Setting Door Travel Limits

Instructions for setting the down and up travel limits for the garage door opener.

Adjusting Force Control and Contact Reverse

Guide for adjusting force settings and performing the contact reverse test.

Programming Remotes and Keypads

Steps for programming additional remote controls and the wireless keypad.

Aladdin Connect System Setup

Guide for setting up and using the Aladdin Connect mobile app for opener control.

Garage Door Opener Maintenance and Safety

Advanced Installation and Setup Procedures

Force Setting Guide and Adjustment

Genie Garage Door Opener Troubleshooting Guide

Common Troubleshooting Issues and Solutions

Solutions for common problems like opener not operating or door movement issues.

Powerhead LED Diagnostic Codes