To Next PageTo Next Page
Need help?Do you have a question about the Genie IntelliG 1000 and is the answer not in the manual?
General| Motor Type | DC motor |
|---|---|
| Security | Intellicode rolling code technology |
| Remote Controls Included | 2 Remote Controls |
| Lift Capacity | Up to 7 ft. Doors |
| Safety Features | Safe-T-Beam infrared system, UL 325 compliant |
| Warranty | Limited lifetime (motor), 5 years (parts), 1 year (accessories) |
| Smart Functionality | Aladdin Connect smart device system |
| Battery Backup | Not Included |
Describes model names, drive types, and customer support contact.
Highlights a key safety warning for the product.
Explains potential hazards and safety alert symbol usage.
Provides crucial safety instructions for installation.
Lists key safety mechanisms and general opener functionalities.
Describes Intellicode security and the wall console interface.
Details the function of the Safe-T-Beam system.
Introduces programming steps, defines terms, and overviews controls.
Step-by-step guide for programming the door's closing travel limits.
Step-by-step guide for programming the door's opening travel limits.
Explains the operation of different wall console models.
Covers setting force/speed and performing the contact reverse test.
Instructions for programming Intellicode 2 remotes.
Indicates the completion of basic programming steps.
Details setting up, resetting, and changing the wireless keypad PIN.
Instructions on how to erase programmed remotes from memory.
Guide for programming older Intellicode 1 remotes.
Instructions for attaching the door bracket to a one-piece door.
Instructions for attaching the door arm to the bracket.
Covers safety during maintenance and monthly tasks.
Details checking the Safe-T-Beam system and door balance.
Explains how to change light bulbs and replace remote batteries.
Describes how to engage/disengage the opener carriage.
Step-by-step instructions for adjusting the door's closing force.
Details speed adjustments and proper placement of Safe-T-Beam sensors.
Provides the main circuit diagram and wiring for various components.
Addresses typical problems with opener operation.
Covers issues like noisy operation, slow opener, and interpreting powerhead LEDs.
Outlines the terms and conditions of the product warranty.
