To Next PageTo Next Page
Need help?Do you have a question about the Genie IS Series and is the answer not in the manual?
General| Security | Yes |
|---|---|
| Remote Control | Yes |
| Remote Controls Included | 2 |
| Battery Backup | No |
| Motor Type | DC |
| Lighting | Yes |
| Voltage | 120V |
| Wireless Technology | Yes |
| Warranty | Limited Lifetime (Motor) |
Assess ceiling for proper mounting location of the power head unit.
Ensure secure fastening of the door operator's header bracket to the wall.
Confirm clear, unobstructed area for Safe-T-Beam bracket attachment.
Check door material for need of additional support bracing.
Verify availability of 110-120 Volt power supply near mounting.
Ensure all door locks are disabled to prevent damage.
Confirm door is properly balanced and moves freely.
Consider emergency release kit if garage lacks separate entry door.
Non-contact system that reverses door during down travel if beam is broken.
Automatically stops and reverses a closing door upon contact with an object.
Opens a closing door if it does not close within 30 seconds.
Sets force for opening/closing; minimum force required for safety.
Lights activate upon door use, turn off 4.5 minutes later.
Allows manual door operation for emergencies or maintenance.
