To Next PageTo Next Page
Need help?Do you have a question about the Genie GPS-IC and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | GPS-IC |
| Category | Garage Door Opener |
| Language | English |
Details potential hazards like moving doors and electrical shock with prevention methods.
Lists safety features such as Safe-T-Beam, Safe-T-Reverse, Force Guard, and lighting.
Identification of various fasteners and remote controls for the operator.
Detailed diagram and list of parts for the Stealth Power Head unit.
Detailed diagram and list of parts for the PRO-MAX Power Head unit.
Diagrams and lists of parts for the door operator channel and rail assemblies.
Instructions for assembling the channel and power head components.
Instructions for assembling the rail and power head components.
Guidance for installing the operator on doors with track systems.
Guidance for installing the operator on doors without tracks.
Details different methods for mounting the operator, such as Angle Iron or Conduit.
Determining the correct door rise measurement for header bracket placement.
Instructions for mounting the Safe-T-Beam sensor and source brackets.
Guidance on positioning the STB source and sensor based on garage door configuration.
Steps for routing and securing the wires for the Safe-T-Beam system.
Troubleshooting guide for common STB system errors based on LED indicators.
Procedure for connecting wires to the wall control terminals for Stealth and MAX models.
Instructions for physically mounting the wall control unit using screws.
Ensuring compliance with local building codes for electrical connections.
Detailed steps for electricians to perform permanent wiring connections.
Steps to set the upper travel limit for the garage door opener.
Steps to set the lower travel limit for the garage door opener.
Procedure for setting the minimum force required to open the garage door.
Procedure for setting the minimum force required to close the garage door.
Testing and adjusting the door's automatic reversal mechanism upon contact.
Fine-tuning the upper travel limit for precise door opening.
Fine-tuning the lower travel limit for precise door closing.
Instructions for programming each button on a multi-button remote control.
Procedure to clear all previously programmed remote control codes.
Guidance on installing light bulbs and recommended bulb types.
Instructions for bending tabs to activate the lens's 'living hinge' feature.
Recommendations for monthly maintenance of door springs and hardware.
Procedure to check and ensure the garage door is properly balanced.
Procedure to test and verify the contact reverse safety feature.
Solutions for issues when the operator does not respond to wall control commands.
Troubleshooting steps for when the door operates unexpectedly.
Solutions for reduced operating range of the remote control.
Wiring diagram for the Stealth Motor model of the garage door operator.
Wiring diagram for the ProMax Motor model of the garage door operator.
List of optional accessories for garage door operation, including remote controls.
Details the coverage, duration, and limitations of the Genie Company's limited warranty.
Instructions on how to get warranty service, including do-it-yourself and dealer options.
