Genie GPOWER 900 User Manual

For Answers and Assistance:
1.800.354.3643
or visit www.geniecompany.com
SAVE THIS MANUAL FOR FUTURE REFERENCE
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
GARAGE DOOR OPENER MODELS
PowerMax
®
1200/1500, SC 1200/1500, TriloG
TM
1200/1500, PowerLift
®
900, GPower
TM
900,
SilentMax
®
1000/1200, CB 1000/1200, IntelliG
®
1000/1200
SCREW/BELT/CHAINDRIVES
OPERATION&MAINTENANCEMANUAL
Genie, Genie logo, Intellicode, Safe-T-Beam, IntelliG, PowerMax, PowerLift, ChainMax and SilentMax are registered trademarks TriloG and GPower are trademarks of GMI Holdings, Inc., dba The Genie Company
Homelink is a registered trademark of Johnson Controls Technology Company. Car2U is a registered trademark of Lear Corporation. ©The Genie Company 2012 PN#38209501773, 9/2012
WARNING
Toreducetheriskofinjurytopersonsordamagetoproperty–Usethisopeneronlywithaone-pieceorsectionaldoor.
38209501773
Needhelporhavequestions? DONOTRETURNtothestore.Callus:800-354-3643
Includes INTELLICODE
®
2 Remote Control. Safe-T-Beam
®
System must be installed to close door.
For use only with residential sectional or one piece overhead garage doors.
Homelink
®
and Car2U
®
compatible.

Genie GPOWER 900 Specifications

General

Warranty	Limited Lifetime (Motor), 1-Year (Parts)
Battery Backup	No
Drive System	Chain Drive
Voltage	120V
Speed	7 inches per second
Security	Rolling code technology

Summary

SCREW/BELT/CHAIN DRIVES

Safety Information

Important Safety Instructions

Crucial warnings and precautions for safe installation and use.

Important Installation Instructions

Key steps and warnings for the correct installation of the opener.

Features

Infrared Protection Function

Explains the operation and safety aspects of the Safe-T-Beam system.

Required Programming

Introduction

Provides an overview of the programming process and its importance.

Overview of Powerhead Controls

Describes the buttons, LEDs, and indicators on the opener's powerhead.

Travel Limits

Details how to set the open and close limits for the garage door.

Wall Console Overview

Explains the functions and indicators of the wall-mounted control console.

Force and Speed Control

Describes how force and speed settings are automatically adjusted.

Contact Reverse Test

Outlines the procedure to test the door's auto-reverse safety feature.

Remotes / New Intellicode 2 Openers

Provides instructions for programming remote controls to the opener.

Optional Programming

Programming the Wireless Keypad

Guides users on setting up and synchronizing a wireless entry keypad.

Resetting PIN

Explains how to erase and reset the PIN for the wireless keypad.

Changing Your PIN

Details the steps to change the existing PIN for the wireless keypad.

Clearing Memory for Remotes

Describes how to erase all programmed remote controls from the opener.

Intellicode® 1 Remotes

Instructions for setting up remotes for older Intellicode 1 systems.

One-Piece Doors

Attaching Door Bracket to Door

Details the process of mounting the door bracket for one-piece doors.

Attaching Door Arm to Door Bracket

Explains how to connect the door arm to the attached bracket.

Maintenance and Adjustments

Contact Reverse Test

Procedure to verify the safety reverse function of the garage door opener.

Safe-T-Beam® (STB) System Check

How to test and ensure the Safe-T-Beam sensor system is functioning correctly.

Door Balance (Spring Tension)

Steps to check the balance and spring tension of the garage door.

Corrective Maintenance

Addresses specific issues like changing light bulbs and replacing remote batteries.

Adjustment Guides

General guidance on adjusting opener settings and understanding indicator lights.

Force Adjustment

How to adjust the force settings for opening and closing the garage door.

Speed Adjustment

Instructions for adjusting the travel speed of the garage door opener.

Wiring Diagram

Troubleshooting

Powerhead LEDs

Explains the meaning of powerhead LED indicators and their corresponding problems.

Warranty