Genie POWERLIFT 900 User Manual

24 pages

To Next Page

For Answers and Assistance:

1.800.354.3643

or visit www.geniecompany.com

SAVE THIS MANUAL FOR FUTURE REFERENCE

INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER

GARAGE DOOR OPENER MODELS

PowerMax

1200/1500, SC 1200/1500, TriloG

1200/1500, PowerLift

900, GPower

900,

SilentMax

1000/1200, CB 1000/1200, IntelliG

1000/1200

SCREW/BELT/CHAINDRIVES

OPERATION&MAINTENANCEMANUAL

Genie, Genie logo, Intellicode, Safe-T-Beam, IntelliG, PowerMax, PowerLift, ChainMax and SilentMax are registered trademarks TriloG and GPower are trademarks of GMI Holdings, Inc., dba The Genie Company

Homelink is a registered trademark of Johnson Controls Technology Company. Car2U is a registered trademark of Lear Corporation. ©The Genie Company 2012 PN#38209501773, 9/2012

WARNING

Toreducetheriskofinjurytopersonsordamagetoproperty–Usethisopeneronlywithaone-pieceorsectionaldoor.

38209501773

Needhelporhavequestions? DONOTRETURNtothestore.Callus:800-354-3643

Includes INTELLICODE

2 Remote Control. Safe-T-Beam

System must be installed to close door.

For use only with residential sectional or one piece overhead garage doors.

Homelink

and Car2U

compatible.

Questions and Answers:

K
Kelly CarterJul 26, 2025
What to do if both LEDs are not ON steady on my Genie POWERLIFT 900?
- A
  April BaileyJul 26, 2025
  If the LEDs on your Genie Garage Door Opener's Safe-T-Beams® are not on, try the following: * Check for any obstructions blocking the beams. * Ensure the beams are properly aligned. * Verify the wire routing from the Safe-T-Beams® to the STB connection in the powerhead. * Check for signal interference from another Safe-T-Beam® unit. * Inspect the wiring and wire connections for any issues.