BRAIN 15
ENGLISH
Guide for the installer
Pagina 12
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated
system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
CE DECLARATION OF CONFORMITY
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Control unit mod. BRAIN 15
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
Additional information:
This product underwent a test in a typical uniform configuration (all products manufactured by GENIUS S.p.A.).
Grassobbio, December 30, 2009
Managing Director
D. Gianantoni
•
•
•
INDEX
1. WARNINGS page.13
2. LAYOUT AND CONNECTIONS page.13
3. TECHNICAL SPECIFICATIONS page.14
3.1. Description of components page.14
3.2. Description of terminal-boards page.14
3.3. Anti-crushing function page.14
3.4. Over pushing stroke page.14
4. PROGRAMMING OF THE LOGIC page.14
5. PROGRAMMING THE SPEED page.14
6. START-UP page.15
6.1. Leds check page.15
6.2. Programming the Dips-switch page.15
6.3. Time - setup learning page.15
7.INSTALLATION OF BUS ACCESSORIES page.16
7.1. Addressing the BUS photocells page.17
7.2. Memory storage of BUS accessotries page.17
8. MEMORY STORING THE RADIO CODE page.18
8.1. Memory storage of 868 radio controls page.18
8.2. Memory storage of 433 radio controls page.18
8.3. Radio controls deletion procedure page.19
9. BATTERY KIT (OPZIONAL) page.19
10. AUTOMATED SYSTEM TEST page.19
11. FUNCTION LOGICS page.20
To Next Page
Loading...
Need help?
General
