7
ENGLISH
350 Kg
300 Kg
250 Kg
200 Kg
150 Kg
100 Kg
50 Kg
0Kg
1m
1.5 m
1.8 m
2m
2.3 m
2.5 m
COMPAS AUTOMATED SYSTEM
The COMPAS automated system consists of a non-reversing
electro-mechanical operator available in two versions:
• COMPAS 24C with built-in control unit
• COMPAS 24 without control unit
The operator was designed for automating the opening of gates
with one or two leaves, with maximum length of 2.5m.
A handy, safe releases system, with personalised key, moves the
leaf in case of a power cut or fault.
The two articulated arms are designed for moving gates with
very large pilasters. The distance between the hinge and the
gearmotor securing point can be up to 220 mm. Thanks to the
special geometry of the two arms, all possible shearing points
have been eliminated.
• Correct operation and the specifications declared in
these instructions can be obtained only with GENIUS
accessories and safety devices.
• To make an installation conforming to current safety
regulations, the absence of a mechanical anti-
crushing clutch, means that a control unit with an
adjustable electronic clutch device is necessary.
• The COMPAS automated system was designed and
built for controlling vehicle access - do not use for
any other purpose.
1rotomraeG
2remrofsnarT
3)ylnorotomretsamrof(tinulortnoC
4ecivedesaeleR
5)lanoitpo(eludomrevieceR
6spotslacinahc
eM
7mranoissimsnarT
8gnisuohgnirevoC
9tekcarbraeR
01gnisuohrewoL
2. TECHNICAL SPECIFICATIONS
LEDOM C42SAPMOC 42SAPMOC
ylppusrewoP~V032-
rotomcirtcelEcdV42cdV42
rewopdebrosbAW021W011
euqrotxaMm/N052m/N052
deepsralugnaxaMces/°31ces/°31
faelxaM
2-1
m5.2m5.2
thgiewfaelxaM
2
hpargeeS
C°02taycneuqerfesUyad/selcyc08yad/selcyc08
C°02taselcycevitucesnoC0303
suounitnocmumixM
emitgnitarep
o
.nim71.T.O
ssalCnoitcetorP44PI44PI
tneibmagnitarepO
erutarepmet
C°55+C°02-C°55+C°02-
levelesioN)A(Bd07<
thgiew
rotarepOgK7.8gK7
snoisnemiD2.gifeeS
1
gnikcoleetnaraugotdellatsniebtsumkcolcirtcelena,m2>LhtgnelahtiwsevaelroF
.faeleht
2
thgiewehT P htgnelehtfonoitcnufasifaelehtfo L enozehtnisifaelruoyfikcehC.
.htaenrednuhpargehtninwohs
3. DIMENSIONS
1. COMPONENTS
FIG. 1
F
IG. 2
To Next Page
Loading...
Need help?
General
