Genius JA574 User Manual

JA574
CENTRALE DI COMANDO A MICROPROCESSORE PER CANCELLI A BATTENTE
MICROPROCESSOR CONTROL UNIT FOR HINGED GATES
ARMOIRE DE COMMANDE À MICROPROCESSEUR POUR PORTAILS BATTANTS
CENTRAL DE MANDO CON MICROPROCESADOR PARA PORTONES DE TIPO BATIENTE
MIKROPROZESSOR-STEUEREINHEIT FÜR FLÜGELTORE
ISTRUZIONI PER L’USO – NORME DI INSTALLAZIONE
USE AND INSTALLATION INSTRUCTIONS
INSTRUCTIONS POUR L’EMPLOI – NORMES D’INSTALLATION
INSTRUCCIONES PARA EL USO – NORMAS DE INSTALACIÓN
BETRIEBSANLEITUNG - INSTALLATIONSVORSCHRIFTEN

Genius JA574 Specifications

General

Brand	Genius
Model	JA574
Category	Gate Opener
Language	English

Summary

General Safety Regulations

Technical Specifications

Layout and Components

Electric Connections

Connection of Photocell and Safety Devices

Details the connection of photocells and safety devices for gate operation.

Terminal Board J3 - Power Supply

Describes the connection of the main power supply to terminal board J3.

Terminal Board J4 - Motors and Flashing Lamp

Details connecting motors and flashing lamp to terminal board J4.

Terminal Board J1 - Accessories

Explains connections for accessories to terminal board J1.

Connector J2 - Rapid Connection

Describes the rapid connection connector J2 for accessories.

Microswitch Programming

Microswitches DS1 Configuration

Configuration of parameters using microswitches DS1.

Microswitches DS2 Configuration

Configuration of parameters using microswitches DS2.

Start-Up Procedures

LED Status Check

Procedure to check the status of LEDs for system diagnostics.

Rotation Direction and Force Adjustment

Verifying motor direction and adjusting force settings.

Operating Time Learning

Procedure for setting gate opening and closing times.

Pre-Flashing Function

Activating the flashing lamp signal before movement.

Automated System Test