Genius MILORD5 User Manual

MILORD
MILORD

Genius MILORD5 Specifications

General

Power supply	230 Vac ± 10%, 50 Hz
Motor voltage	24 Vdc
Operating temperature	-20°C to +55°C
Protection level	IP44
Remote Control Range	30m
Safety Features	Obstacle detection

Summary

Important Notice for the Installer

General Safety Regulations

General safety rules to follow before and during installation.

CE Declaration of Conformity for Machines (Directive 98/37/EEC)

Milord Automated System

1. Description and Technical Specifications

Detailed description and technical specifications of the MILORD operators.

2. Electrical Set-up (standard system)

Instructions for the electrical setup of the standard automated system.

3. Installing the Automated System

3.1. Preliminary Checks

Essential checks required for the gate structure before installation.

3.2. Installing the Operator

Procedure for physically installing the operator unit.

3.3. Installing the Rack

Detailed steps for installing the rack onto the gate leaf.

3.4. Positioning the Stroke-Limit Magnets

How to correctly position the magnetic limit switches for gate movement.

4. Start-Up

5. Automated System Test

6. Manual Mode Operation

Restoring Normal Operating Mode.

Procedure to return the gate system to normal operation after manual use.

7. Special Applications

8. Maintenance

9. Repairs