Genius MousePen 8x6 User Manual

1
ENGLISH
P
RESSURE-SENSITIVE TABLET PLATE
QUICK INSTALLATION GUIDE
HARDWARE INSTALLATION
To attach the Tablet Plate with a USB interface to the PC, insert the USB
connector into an available USB port on the PC.
Figure 1 Attaching Tablet Plate with a USB Interface to a PC
DRIVER INSTALLATION
For Windows XP/ME/2000/98:
1. Insert the Driver disc into the CD-ROM drive, and wait for the Setup screen to appear.
2. In most systems, the Setup program will start automatically. If it
doesn’t, start the Setup program manually by selecting Start/Run,
and type "E:\setup" (where “E:” represents the location of the
CD-ROM drive), then press the Enter key.
3. Select the Tablet Driver Setup button and press OK to install the
Tablet Driver. The software will be installed automatically.
4. Click on the PenSuite Setup button and press OK to install the
PenSuite software. The software will be installed automatically.

Genius MousePen 8x6 Specifications

General

Active Area	8 x 6 inches
Resolution	4000 LPI
Report Rate	200 RPS
Pressure Levels	1024
Interface	USB
Pen Buttons	2
Weight	1.1 lbs
Compatibility	Windows
Tablet Buttons	4

Summary

Hardware Installation

Driver Installation

Insert Driver Disc

Insert the Driver disc into the CD-ROM drive and wait for the Setup screen to appear.

Manual Setup Start

If setup doesn't start automatically, use Start/Run and type 'E:\setup' to launch.

Install Tablet Driver

Select the Tablet Driver Setup button and press OK to initiate automatic installation.

Install PenSuite Software

Click the PenSuite Setup button and press OK for automatic software installation.

Install Corel Painter

Click the Corel Painter Setup button to install the associated software.

Complete Installation

Close all applications and click 'Finish' or 'Exit' to restart your computer.

Verifying Installation

Hardware and Driver Functions Check

Verify proper installation by checking LED light status and component functions.

Wake Up Pen/Mouse

Tap or press buttons on pen/mouse to wake them from sleep mode after inactivity.

LED Light Behavior

Observe LED light: briefly on with power, flashing with pen proximity, on with button press.

Tablet Icon in Task Bar

Confirm a small tablet icon appears in the system Task Bar for proper driver installation.

Cursor Movement Verification

Ensure the screen cursor moves accurately with pen/mouse movement over the tablet area.