Genius P5143 - Canceling Image Protection

English
-23-
 [Select]: Select the image you want to
protect in thumbnail mode.
6. Select [Lock] with the buttons, and
press the OK button.
 Protection is applied to the image and the
camera returns to the previous menu mode.
 The protect icon [ ] is displayed with
protected images.
 When [All] has been selected, [ ] is
displayed with all the images.
Canceling the Protection
To cancel protection for only one image, display the image where you want to remove
the image protection.
1. Press the [ ] button.
2. Select the protected image that you want to unlock with the buttons.
3. Press the MENU button.
4. Select [Protect] with the buttons from the playback menu, and press the
OK button.
5. Select [Single], [All], or [Select] with the buttons, and press the OK button.
6. Select [Unlock] with the buttons, and press the OK button.
 The removal of image protection is executed and the camera returns to the
previous menu mode.
NOTE
 Formatting an SD/SDHC memory card or internal memory overrides protection, and
erases all images regardless of their protected status.