English
-32-
[Size]: Select the desired paper size according to the printer type.
[Layout]: Select the desired printing
layout according to the printer type.
[Print]: After all settings are configured,
select this item to start printing.
2. If you select [Images] in the previous step,
the figure shown on the right hand side will
appear. Select [Select], [All] with the
buttons, and press the OK button.
[Select]: Select to print one specific
image.
[All]: Select to print all images.
3. If you select [Select] in the previous step,
the figure shown on the right hand side will
appear.
Select the image that you want to print
with the
buttons.
Select the [Print Num] (up to 99) with the
buttons.
After selecting the desired image and
printing number, press the OK button to
confirm.
4. Select [Print] with the buttons, and
press the OK button to start printing.
5. The printing starts and the figure shown on
the right hand side appears.
[COMPLETE] will be displayed
temporarily, reminding you that the
printing procedure is finished.
If a print error is detected, [PRINT
ERROR] will be displayed.
NOTE
The image printing may fail if the power to the camera is cut off.
To Next Page
Loading...
