26
GB
Instruction manual
Troubleshooting
Problem Possible cause Solution
The handheld vacuum
cleaner is not showing any
sign of function.
The battery is discharged.
Charge the battery of the handheld vacuum
cleaner (see “Charging the handheld vacuum
cleaner”).
The charging display 12
is
not lighting up.
The power supply 2 is not
correctly connected to the plug
socket or to the handheld
vacuum cleaner.
Ensure that the power supply is correctly
inserted into the plug socket 3 and that the
power connector is correctly inserted into the
charging socket 1 or charging base 14.
When using the charging
station, there is no contact
between the vacuum cleaner
and the charging station.
Ensure that the charging station has been
correctly mounted – see chapter entitled, „Prior
to rst use“.
Ensure that the dust container is correctly
installed. Attach it to the handheld appliance as
such that the release button is on the same side
as the On/O switch.
When charging in the charging station, ensure
that the brush attachment is attached and
folded in, so as to ensure proper contact.
The suction performance
is poor.
The metal lter 9 or Hepa lter
10 is blocked.
Clean the lters (see “Cleaning”).
The battery is discharged.
Charge the battery of the handheld vacuum
cleaner (see “Charging the handheld vacuum
cleaner”).
The dust container 8 is full.
Empty the dust container (see “Emptying the
dust container”).
Dust is coming out of the
air vents.
The metal lter or Hepa lter is
damaged.
Contact your local retailer to order a replacement
lter.
The dust container is full.
Empty the dust container (see “Emptying the
dust container”).
The metal lter or Hepa lter is
not correctly inserted.
Re-attach the lters correctly to the handheld
vacuum cleaner after cleaning (see “Cleaning”).
To Next Page
