EasyManua.ls Logo

GENMAX GM12000ED - STARTING UP THE GENERATOR; Startup Procedure

GENMAX GM12000ED
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
STARTING UP THE GENERATOR
Remove the load from all output ends;
1.
Connect the positive and negative electrodes of the battery;
2.
Select the Fuel:
a. Gasoline: Turn the fuel source switch to gasoline.
b. LPG:
1. Connect the LPG hose to the LPG tank;
2. Tighten the other end of the LPG hose to the generator intake;
3. Turn the fuel source switch to LPG.
3.
1. 2. 3.
Turn the choke lever to the "CLOSED" position;
Tip: Don't close the choke when starting the engine in warm state.
5.
Select Boot Mode:
a. Hand Starting: Pull the starting handle to
start the generator.
b. Electric Start: Press the engine switch
upward to the Start position "Start" for 2-3 s.
6.
Turn the choke lever to the "OPEN" position;
7.

Related product manuals