04 Product Functions and Introduction
18
When engraving with rotation, the -axis goes through its normal scanning motion, but the y-axis remains stationary while the rotation
provides movement in that direction.
The spinner can hold a wide variety of round objects, from something as thin as a pencil to a 32-ounce Yeti-style glass.
It consists of a fixed axis and a moving axis that can be locked into 1 of 4 positions.
Note:
1. Loosen the knobs at both ends at the same time, push the pulley to the desired position, and then lock the knobs at both ends at
the same time.
2. When using rotary engraving vector content, we recommend engraving at a speed <800mm/min.
Axis of rotation
Rotating axis lead socket
Connecting line
Rotary axis matching module
Place the roller in the required area, use the connecting wire
to plug intothe panel "Roller", and plug the other end into the
roller motor.
Engraved tapered cylinder
For example, with some popular glass tumbler, it is often best
to support the narrow end of the cylinder so that the horizontal
edge is presented tothe laser. The swivel includes an end
support.
To Next Page
Loading...
