Need help?Do you have a question about the Genmitsu LE5040 and is the answer not in the manual?
Details the module's application with LE5040 and engraving cylinder dimensions.
Lists roller adjustment range, motor type, pulse settings, load weight, and overall dimensions.
Position engraving material between rollers to ensure proper fit and support.
Modify roller spacing by adjusting bolts and tensioning wheel for smooth synchronized movement.
Place LE5040, connect rotary axis stepper motor cable, and ensure proper positioning.
Align rotary axis so cylinder is parallel to X-axis and laser beam is perpendicular.
Download LaserGRBL, select COM port, set baud rate to 115200, and connect.
Input G-code '$101=84' to configure the rotary axis steps per millimeter.
Use focusing tool and flat objects to set distance between laser and cylinder.
Test fire laser at low power (<=5%) to ensure a tiny, sharp focus point.
Fire laser at low power and adjust focus knob clockwise to achieve the smallest point.
To Next Page
General