37
Laser Maintenance
09 Maintenance and Care
1. Remove the air nozzle for cleaning and maintenance.
2. Remove the window mirror for cleaning and maintenance.
Maintain your machine here are some things you can do regularly to keep your L8 in good working order and reduce wear and
tear on your engraving machine.
Clean the laser module lens over time, particles will be deposited on the outer lens of the laser module. This reduces the module's
power output and heats the lens.
If you notice that your laser is having difficulty cutting materials that you previously had no problem with, it may be time to clean
the lenses.
Remove the laser from the machine, turn the knob to the right, and gently clean the lens with a cotton swab or alcohol wipe dipped
in alcohol.
When you are using it, please connect it to the air pump module and select the appropriate air volume level according to the
required content.
Laser
2 Remove the window mirror for
cleaning and maintenance
1 Remove the air nozzle for
cleaning and maintenance
To Next Page
Loading...
