Genmitsu L8 - Specific Safety Alerts

Safety Instructions
Pay attention！
03
Laser module is consumable. It's recommended to keep the machine power off for 10 minutes after 4-hour
engraving and keep the machine power off for 10 minutes after 1-hour cutting.
When the laser is turned
on, it is prohibited to aim
at humans, animals and
flammables to avoid skin
burns and fire.
The laser brightness
is harmful to the eyes.
Do not look directly at
the laser.
Keep hands away
from the machine
during operation
to avoid injury.
Turn off the machine when
it is not in use to avoid
misoperation.
Caution Laser
Do Not Look Directly
No Reaching In
TURN OFF MACHINE
WHEN NOT IN USE
Maintenance