12
6.2 CONTROL FUNCTIONS
LOW IDLE MODE
When the switch is in the “ON” position the throttle
controls the engine speed according to the connected
electrical load. The results are better fuel consumption
and less noise. When the switch is in the” OFF”
position the engine runs at 4,500 rpm regardless of the
electrical load.
Note: The switch must be “OFF” when using electrical
devices that require a large starting current such as
compressors, pumps or refrigerators.
LED INDICATORS
The Led Indicators assist in communicating status and
functions of the Generator.
Output Indicator (Green)
The Output Indicator comes on when the engine starts
and produces power.
Overload Alarm (Red)
The Overload Alarm comes on when a connected
device requires more power than the generator is able to produce.
The Output Indicator (Green) will go off and the Overload Alarm (Red) will stay
on, but the engine will continue to run.
To Next Page
Loading...