17
RECOMMENDED ENGINE OIL:
Only use 4 stroke automotive oil (API or SE) alternatively you can use a
higher grade (SG, SH or SJ). SAE 15W-40 is recommended for general
all temperature use. If single viscosity oil is used, select the appropriate
viscosity for the average temperature in your area.
7.3 ADDING FUEL:
7.3.1 Do not overfill the tank, otherwise it may overflow when the fuel
warms up and expands.
Note: For safety reasons once the fuel has been added to this unit it cannot be
returned to the place of purchase, please contact Gentech Industries for all
service-related enquiries.
7.3.2 Use clean, fresh, regular unleaded fuel with a minimum octane
level of 85.
7.3.3 DO NOT mix oil with the fuel.
7.3.4 Always clean the area around the fuel cap.
7.3.5 Remove the fuel cap.
7.3.6 Be sure that the fuel strainer is in place.
7.3.7 Slowly add the fuel to the tank.
7.3.8 Do not exceed the red marker position of the fuel filter.
7.3.9 Screw on the fuel cap and wipe away and spilled fuel.
To Next Page
Loading...