Gentex CVC M9 - Helmet Fitting; Remove Ballistic Shell; Don the Inner Helmet

HELMET FITTING
6
WARNING
Always wear the helmet with the ballistic shell attached during missions. Failure to do so will decrease
bump protection.
Fitting must be performed by a qualied maintenance technician.
NOTE: This helmet is tted with the ballistic shell removed.
REMOVE BALLISTIC
SHELL
Unfasten the front and rear snaps to
remove the ballistic shell from the
inner helmet.
1
DON THE INNER
HELMET
Have the crewmember don the
inner helmet.
2
Front
Hanger Tab
Front Snap
Rear
Hanger
Tab
Rear Snap