Gentex CVC M9 - Adjust Width and Height; Adjust Nape Strap; Fasten and Adjust Chinstrap; Doff the Inner Helmet

7
CONTINUED
ADJUST THE NAPE
STRAP
Adjust the nape strap for a snug,
secure t at the nape.
4
FASTEN/ADJUST
CHINSTRAP
Fasten and adjust the chinstrap for
a sug, secure t.
5
DOFF THE INNER HELMET
Unfasten the chinstrap and have the crewmember remove the inner helmet.
NOTE: The inner helmet is designed to t most heads. However, if the brow pad is too
loose, it may be tucked and sewn on both sides. Please refer to the technical manual for
more information.
6
ADJUST THE WIDTH/
HEIGHT
Adjust the top width/height adjustment
strap so that the crown of the liner
is snug and the earcups are properly
aligned with the ears.
3