Need help?Do you have a question about the geo-FENNEL FMR 800-M/C and is the answer not in the manual?
General| Power Supply | 2 x 1.5 V AA alkaline |
|---|---|
| Modulation | FM |
| Sensitivity | 100 dB |
| Dimensions | 173 x 76 x 36 mm |
| Weight | 300 g |
Details the FMR 800-M/C-SET package including receiver, charger, remote display, and case.
Details the FMR 800-M/C package including receiver, charger, and hard carrying case.
Details the FRD 807 remote display package with adjustable suction pad mount and batteries.
Lists and illustrates components of the FMR 800-M/C machine control receiver.
Lists and illustrates components of the FRD 807 remote display unit.
Explains the internal NiMH rechargeable battery, charging, and status indicators for the receiver.
Details the battery requirements for the FRD 807 remote display, using AA alkaline batteries.
Describes magnetic and clamp connections for the FMR 800-M/C to machine masts or arms.
Explains using magnetic strips or suction mounts for the FRD 807 in the cabin.
Instructions for powering the receiver on and off using the designated button.
Procedure for selecting the desired accuracy setting for height indication.
Details on selecting radio channels for communication between receiver and remote display.
Interpreting LED sequences for indicating vertical position relative to the laser plane.
Instructions for activating and using the bulldozer mode for blade control.
Procedure for setting fine, standard, or coarse tilt accuracy in bulldozer mode.
Visual guide to LED indicators for blade level, too high, or too low in bulldozer mode.
Steps for setting up the receiver on a bulldozer mast for accurate operation.
Procedure for setting and memorizing a specific blade tilt angle.
Instructions to reset the blade tilt position to the neutral 'on-level' state.
Instructions for activating and using the excavator mode for bucket control.
Procedure for setting fine, standard, or coarse tilt accuracy in excavator mode.
Interpreting LED sequences for indicating the excavator arm's vertical position.
Setup guide for the receiver on an excavator arm for trenching operations.
Setup guide for the receiver on an excavator arm during trench excavation.
Guidelines for handling, cleaning, and transporting the instrument safely.
Declaration of compliance with relevant EC directives for electromagnetic compatibility.
Information regarding the product's warranty period and conditions.
Manufacturer's disclaimers regarding product usage and potential damages.
General safety precautions for using the instrument and its environment.
To Next Page
