Select Button
The “SELECT” Button controls the Heating Elements. By being
able to control the Heating Elements, you can adjust the browning
if the food is cooking/browning unevenly. Each of the Heating
Elements is represented by an LED above the “SELECT” Button.
The four LEDs match the four Heating Elements inside the
Rotisserie Oven. The LED on the top corresponds to the Heating
Element on the top of the Rotisserie Oven. The left LED and the
right LED on the bottom correspond to the front and back Heating
Elements on the bottom of the Rotisserie Oven. The Center LED on
the bottom corresponds to the center Heating Element on the
bottom of the Rotisserie Oven. The Default setting for the Select
Button is to turn on the Front and Back Heating Elements.
However, we recommend you begin cooking with all four heating
elements turned on. Then, as necessary, you may adjust the
number of heating elements used to either slow down or speed up
the cooking process.
Motor Button
The “MOTOR” Button controls the Rotisserie Motor. Press the
“MOTOR” Button to turn the motor on or off. When using the
Baking Sheet or Wire Rack, you will not need to turn on the
Rotisserie Motor.
Getting to Know Your
George Foreman Rotisserie Oven
(cont.)
8
To Next Page
Loading...
Need help?
General
