Before You Begin:
1. Load 3 AA batteries in the control box on the bottom of the
platform. See the battery installation instructions at the end
of this guide.
2. Lay the GeoSafari® Talking Planetary Mat on the floor.
The mat and platform must lie on a flat hard surface in order
for it to function properly.
3. Turn the On/O switch (located underneath the platform)
to the On position.
4. Tap the platform with your foot to wake it up. The LCD will
display “CAL” while the platform calibrates the weight sensors.
5. Once calibration is complete, you will be prompted to start
using the GeoSafari Talking Planetary Mat.
Fact mode
Learn about
our solar system.
Game mode
Test your
knowledge.
Info screen
Your source
for information.
Platform
All explorers
start here.
Volume
To mute the audio,
turn the dial all the
way down.
On/Off switch
(underneath)
lb/kg switch
(underneath)
Toggle
between
measurement
systems.
Battery door
Located on the bottom
of the platform.
8
+
3
+
Ages Grades
EI-5279