To Next PageTo Next Page
Need help?Do you have a question about the GeoVision GV-ABL8712 and is the answer not in the manual?
General| Camera Type | Bullet |
|---|---|
| Resolution | 8MP |
| Lens Type | Motorized Varifocal Lens |
| Wide Dynamic Range | Yes |
| Weatherproof Rating | IP67 |
| Image Sensor | 1/2.8" CMOS |
| Image Resolution | 3840 x 2160 |
| Frame Rate | 30 fps |
| Aperture | F1.4 |
| Minimum Illumination | 0.03 Lux |
| Day/Night | Yes (with IR-cut filter) |
| IR Distance | 50 m (164 ft) |
| Ethernet | 10/100 Ethernet |
| Protocols | TCP, UDP, HTTP, DHCP, DNS, DDNS, NTP, SMTP, SNMP, UPnP, RTP, RTSP, RTCP, Bonjour |
| Operating Temperature | -30°C ~ 50°C (-22°F ~ 122°F) |
| Power Supply | 12V DC / PoE (IEEE 802.3af) |
Steps for connecting the IP camera to your network and powering it.
Guide to locating the camera's IP address and accessing the web interface.
Configuring smart settings like Cross Line, Intrusion, Face Detection, etc.
Instructions for updating the camera's firmware via web interface or utility.
Step-by-step guide to upgrading firmware using the camera's web interface.
Procedure to reset the camera to its original factory default settings.
Steps to install and configure IP cameras with GV-DVR or GV-NVR systems.
Guide to manually connect and set up IP cameras with the GV-VMS software.
