To Next PageTo Next Page
Need help?Do you have a question about the GeoVision GV-ADR4701 and is the answer not in the manual?
General| Model | GV-ADR4701 |
|---|---|
| IR LED | Yes |
| Audio | Built-in microphone |
| Audio Compression | G.711 |
| Weatherproof Rating | IP67 |
| Image Sensor | 1/2.8" CMOS |
| Minimum Illumination | 0 lux (IR on) |
| Focal Length | 2.8 mm |
| IR Distance | 30 meters |
| Video Compression | H.265 / H.264 |
| Wide Dynamic Range (WDR) | Yes |
| Day/Night | Yes (with IR-cut filter) |
| Ethernet | 10/100 Mbps |
| Protocols | TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, UPnP, Bonjour, IPv6 |
| ONVIF | Yes |
| Local Storage | Micro SD card slot (SD/SDHC/SDXC/UHS-I) |
| Power Supply | DC 12V ±10% |
Guides users on connecting the IP camera to a network and accessing its web interface.
Explains how to view live video streams from the camera, including zoom and playback controls.
Explains how to configure network settings like IP address, DNS, ports, and DDNS.
Details smart settings for video analytics like Cross Line, Intrusion, Face Detection, and People Counting.
Explains how to format storage, set up FTP, and manage backup storage for recorded data.
Details user account management and network security settings like HTTPS and ARP protection.
Provides instructions on how to update the camera's firmware using the web interface or utility.
Explains how to reset the camera to its factory default settings via the web interface or default button.
Guides users on how to install and configure IP cameras within the GV-DVR/NVR system.
Details the process of connecting and setting up IP cameras with the GeoVision Video Management System (GV-VMS).
