Need help?Do you have a question about the GeoVision GV-BL3400 and is the answer not in the manual?
General| Image Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| Aperture | F1.4 |
| Gain Control | Auto / Manual |
| S/N Ratio | > 50 dB |
| WDR | Yes |
| Video Compression | H.264, MJPEG |
| Audio Compression | G.711 |
| Audio | Two-way audio |
| Audio Input/Output | 1/1 |
| Network Interface | RJ-45 |
| Weatherproof Rating | IP66 |
| Ingress Protection | IP66 |
| White Balance | Auto / Manual |
| Day/Night | Auto |
| IR Distance | 30 m |
| Frame Rate | 30 fps |
| Ethernet | 10/100 Base-T |
| Protocol | HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, DDNS, NTP |
| Local Storage | Micro SD, up to 128 GB |
| Operating Temperature | -20°C to 50°C |
| Power Supply | 12V DC |
Details the items included in the Box Camera package for setup.
Outlines the key features and capabilities of the Box Camera series.
Provides a physical overview of the Box Camera models with component identification.
Guides on how to connect the Box Camera to power and network for operation.
Details the installation process for optional accessories like C-Mount lenses.
Explains the pin assignment and functionality of the Box Camera's I/O terminal block.
Lists all items included in the Ultra Box Camera package.
Highlights the key features and specifications of the Ultra Box Camera series.
Provides a physical overview of the Ultra Box Camera, including ports and indicators.
Details the steps for installing the Ultra Box Camera on walls or ceilings.
Instructions for connecting the Ultra Box Camera to network and power sources.
Lists all components included in the Bullet Camera package.
Details the features of the Bullet Camera series, including image sensor and frame rate.
Provides a physical overview of the Bullet Camera, identifying key components.
Step-by-step instructions for the basic installation of the Bullet Camera.
Explains the wire definition for connecting the Bullet Camera's data cable.
Guides on how to access the camera's live view and initial configuration.
Provides instructions on adjusting image clarity using the GV-IP Device Utility.
Covers essential basic configurations for the camera after installation.
Covers settings for video and motion detection, including dual stream capabilities.
Details configuration for Digital I/O settings, essential for connected devices.
Configuration for handling events like motion detection and I/O triggers via alerts.
Provides options for starting monitoring manually, by schedule, or by input trigger.
Allows setting schedules for recording and I/O monitoring on specific times.
Enables playback of recorded files over TCP/IP network using the Remote ViewLog player.
Covers network configurations like LAN, Wireless, and advanced TCP/IP settings.
Includes settings for date/time, user accounts, storage, and system operations.
To Next Page