Need help?Do you have a question about the GeoVision GV-BX120D and is the answer not in the manual?
General| Total megapixels | 1.3 MP |
|---|---|
| Maximum resolution | 1280 x 1024 pixels |
| Supported video modes | - |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 320 x 240, 1280 x 960, 1280 x 720 (HD 720) |
| White balance | Auto |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/8000 s |
| Minimum illumination | 0.04 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Optical zoom | - x |
| Focal length range | 2.8 - 12 mm |
| Video motion detection | Yes |
| Compatible memory cards | microSD (TransFlash), microSDHC, microSDXC |
| LED type | IR |
| Number of illumination LEDs | 2 |
| Type | IP security camera |
| Certification | CE, FCC, C‐Tick, RoHS |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Form factor | Box |
| Mounting type | Ceiling/wall |
| Product color | Black, Grey |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio system | 2-way |
| Audio formats supported | AAC |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS, 3GPP/ISMA, RTSP, PSIA, SNMP, QoS (DSCP), ONVIF |
| DC output voltage | +12V |
| Power consumption | 350 mA |
| Power source type | PoE |
| Power consumption (typical) | 7 W |
| Cables included | BNC, LAN (RJ-45) |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| F-number (relative aperture) | 1.4 |
Weight and Dimensions| Depth | 75 mm |
|---|---|
| Width | 75.5 mm |
| Height | 54 mm |
| Weight | 321 g |
Outlines FCC rules compliance for specific camera models.
Details UL certification for specific camera models regarding RTC battery.
Outlines the system requirements for performing GV-IPCAM H.264 operations via a web browser.
Provides instructions on how to connect the Box Camera to a network and power source.
Details the steps for physically installing the Ultra Box Camera on walls or ceilings.
Guides users on connecting the network and power cables to the Ultra Box Camera.
Details the steps for physically installing the Target Box Camera on walls or ceilings.
Guides users on connecting the network and power cables to the Target Box Camera.
Details the steps for installing the IR Arctic Box Camera outdoors.
Guides users on connecting the network and power cables to the IR Arctic Box Camera.
Details the installation procedures for the Mini Fixed Dome and Mini Fixed Rugged Dome cameras.
Guides users on connecting power and network for the Mini Fixed Dome and Mini Fixed Rugged Dome cameras.
Details the installation procedures for the Target Mini Fixed Dome on walls or ceilings.
Guides users on connecting the network and power cables to the Target Mini Fixed Dome.
Details the installation procedures for the Target Mini Fixed Rugged Dome.
Guides users on connecting the network and power cables to the Target Mini Fixed Rugged Dome.
Details the basic installation steps for the Bullet Camera.
Details the steps for installing the Ultra Bullet Camera on ceilings or walls.
Details the installation procedures for the Target Bullet Camera.
Guides users on connecting the network and power cables to the Target Bullet Camera.
Details the installation procedures for the PTZ Camera, including ceiling and wall mounts.
Guides users on connecting the network and power cables to the PTZ Camera.
Explains how to adjust the focus for optimal image clarity on the PTZ Camera.
Details how to control the camera's pan, tilt, zoom, and other settings via the web interface.
Refers to the installation procedures for the GV-PT Camera in Chapter 12.
Refers to the connection procedures for the GV-PT Camera in Chapter 12.
Details how to control the PT Camera's functions and settings.
Explains how to access the camera's live view and configure its IP address and wireless settings.
Details the procedures for adjusting image clarity and focus for various camera models.
Guides users on how to access surveillance images via a web browser after installation.
Covers video settings, motion detection, privacy mask, text overlay, and visual automation.
Explains how to configure e-mail, FTP, Center V2, VSM, and other alerts for detected events.
Details network configurations like LAN, wireless client mode, and advanced TCP/IP settings.
Guides users on enabling and configuring the camera's recording function.
Explains various methods for playing back recorded video files.
Details the process of upgrading the camera's system firmware via web interface or utility.
Provides instructions for restoring the camera to its default factory settings.
Guides users on how to change the login password for the GV-IP Camera.
Guides users on setting up and adding an IP camera to the GV-System.
To Next Page
