Need help?Do you have a question about the GeoVision GV-FE110 and is the answer not in the manual?
General| Frame Rate | 30 fps at 1280 x 1024 |
|---|---|
| Day/Night | Yes |
| IR Cut Filter | Yes |
| Video Compression | H.264, MJPEG |
| Audio Compression | G.711, G.726 |
| Camera Type | Dome |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Maximum Resolution | 1.3MP |
| Lens | Fixed lens (varies by model) |
| Audio | Yes, Built-in Microphone |
| Ethernet | 10/100 Ethernet |
| Protocols | HTTP, TCP, UDP, SMTP, FTP, DHCP, DNS, NTP, UPnP, RTSP, PPPoE, Bonjour |
| Local Storage | MicroSD card slot |
| Power | PoE (IEEE 802.3af) |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to 50°C |
| Dimensions | Ø 110 mm |
| Weather Resistance | IP66 |
Lists the primary capabilities and specifications of the GV-Fisheye IP Camera.
Specifies the necessary hardware and software for operating the camera.
Provides instructions for mounting the fisheye camera in various locations.
Explains how to connect the camera's data and power cables correctly.
Guides the user through connecting the camera to a network.
Details the process of viewing live camera feeds through a web browser.
Covers video settings, motion detection, privacy mask, and text overlay.
Covers network configuration, including LAN settings and IP addressing.
Instructions for enabling and configuring the camera's recording function.
Guides on how to update the camera's firmware.
Procedures for resetting the camera to its original factory settings.
How to configure and add IP cameras to the GV-System.
To Next Page