Need help?Do you have a question about the GeoVision GV-BL3410 and is the answer not in the manual?
General| Total megapixels | 3 MP |
|---|---|
| Maximum resolution | 2048 x 1536 pixels |
| Supported video modes | - |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 320 x 240, 1280 x 960, 1280 x 720 (HD 720) |
| Pan range | 0 - 360 ° |
| White balance | Auto |
| Tilt angle range | 90 - 180 ° |
| Angle of rotation | 360 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/8000 s |
| Minimum illumination | 0 lx |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/3.2 \ |
| Optical zoom | 3 x |
| Focal length range | 3 - 9 mm |
| Compatible memory cards | microSD (TransFlash), SDHC, SDXC |
| LED type | IR |
| Night vision distance | 15 m |
| Number of illumination LEDs | 16 |
| Type | IP security camera |
| Certification | CE, FCC, C‐Tick, RoHS |
| GPS (satellite) | No |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Form factor | Bullet |
| Mounting type | Wall |
| Product color | White |
| International Protection (IP) code | IP67 |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio system | 2-way |
| Signal-to-Noise Ratio (SNR) | 47 dB |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS, 3GPP/ISMA, RTSP, PSIA, SNMP, QoS (DSCP), ONVIF |
| DC output voltage | +12V |
| Power consumption | 350 mA |
| Power source type | PoE |
| Power consumption (typical) | 12.48 W |
| Cables included | LAN (RJ-45) |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 50 % |
Weight and Dimensions| Depth | 148.95 mm |
|---|---|
| Width | 87.75 mm |
| Height | 238.6 mm |
| Weight | 1400 g |
Specifies PC and browser requirements for GV-IPCAM H.264 operations.
Lists all items included in the Box Camera package.
Details the key functionalities and hardware features of the Box Camera series.
Provides a physical overview of the camera's ports and components.
Provides instructions on connecting the Box Camera to a network and power.
Instructions for installing optional accessories like C-Mount lenses and IR illuminators.
Explains the I/O terminal block interface for input and output devices.
Lists all items included in the Ultra Box Camera package.
Details the key functionalities and features of the Ultra Box Camera.
Step-by-step guide for installing the Ultra Box Camera.
Instructions for connecting the Ultra Box Camera to network and power.
Lists all items included in the Target Box Camera package.
Details the key functionalities and features of the Target Box Camera.
Step-by-step guide for installing the Target Box Camera.
Lists all items included in the IR Arctic Box Camera package.
Details the key functionalities and features of the IR Arctic Box Camera.
Step-by-step guide for installing the IR Arctic Box Camera outdoors.
Instructions for connecting the IR Arctic Box Camera to network and power.
Provides important notices regarding the use of IR LEDs and status LEDs.
Lists all items included in the Mini Fixed Dome/Rugged Dome package.
Details the key functionalities and features of the Mini Fixed Dome and Rugged Dome series.
Step-by-step guide for installing the Mini Fixed Dome camera.
Instructions for connecting the Mini Fixed Dome and Rugged Dome cameras to power and network.
Lists all items included in the Target Mini Fixed Dome package.
Details the key functionalities and features of the Target Mini Fixed Dome.
Step-by-step guide for installing the Target Mini Fixed Dome camera.
Lists all items included in the Target Mini Fixed Rugged Dome package.
Details the key functionalities and features of the Target Mini Fixed Rugged Dome.
Step-by-step guide for installing the Target Mini Fixed Rugged Dome camera.
Lists all items included in the Bullet Camera package.
Details the key functionalities and features of the Bullet Camera series.
Instructions for the basic installation of the Bullet Camera.
Defines the wire colors and their functions for connecting the Bullet Camera.
Guides on adjusting the camera lens for clear image and inserting an SD card.
Lists all items included in the Ultra Bullet Camera package.
Details the key functionalities and features of the Ultra Bullet Camera.
Instructions for installing the Ultra Bullet Camera to the ceiling or wall.
Lists all items included in the Target Bullet Camera package.
Details the key functionalities and features of the Target Bullet Camera.
Instructions for installing the Target Bullet Camera.
Lists all items included in the PTZ Camera package.
Details the key functionalities and features of the PTZ Camera.
Instructions for installing the PTZ Camera, including ceiling and wall mounts.
Instructions for connecting the PTZ Camera to network and power.
Guides on adjusting the camera focus for image clarity.
Lists all items included in the PT Camera package.
Details the key functionalities and features of the PT Camera.
Refers to the installation procedures for the GV-PT Camera.
Refers to the connection procedures for the GV-PT Camera.
Lists all items included in the Vandal Proof IP Dome package.
Details the key functionalities and features of the Vandal Proof IP Dome.
Explains the two ways to install the Vandal Proof IP Dome.
Instructions for connecting the Vandal Proof IP Dome to power, network, and other cables.
Lists all items included in the Vandal Proof IP Dome (Part II) package.
Details the key functionalities and features of the Vandal Proof IP Dome (Part II).
Instructions for installing the Vandal Proof IP Dome outdoors on a ceiling.
Instructions for connecting the Vandal Proof IP Dome to power, network, and other wires.
Lists all items included in the Fixed IP Dome package for hard-ceiling mount.
Details the key functionalities and features of the Fixed IP Dome.
Explains the three ways to install the Fixed IP Dome.
Instructions for connecting the Fixed IP Dome to network and power.
Lists all items included in the Cube Camera package.
Details the key functionalities and features of the Cube Camera.
Step-by-step guide for installing the Cube Camera.
Instructions for connecting the Cube Camera to network and power.
Lists all items included in the Advanced Cube Camera package.
Details the key functionalities and features of the Advanced Cube Camera.
Step-by-step guide for installing the Advanced Cube Camera.
Guides on accessing the camera's live view and initial network configuration.
Instructions for configuring static or dynamic IP addresses for the camera.
Guides on setting up a wireless LAN connection for compatible cameras.
Procedures for adjusting image clarity using the GV-IP Device Utility.
Covers essential configurations like date/time, passwords, network, and image settings.
Steps to access the camera's live view and surveillance images via a web browser.
Introduces features accessible on the main page, including Live View and Network Status.
Describes the Live View window interface when accessed via Internet Explorer.
Explains the functions and controls available in the Live View window's control panel.
Details how to configure alerts for motion detection or I/O triggers.
Explains the Visual PTZ feature for easy and direct PTZ operation on live images.
Describes how non-PTZ cameras can simulate PTZ movements on live view.
Explains the I/O control window for managing camera status and triggering outputs.
Covers video image settings and management through Motion Detection, Privacy Mask, etc.
Details settings for defining video compression, resolution, and frame rate.
Explains how to configure motion detection areas and sensitivity for alarms.
Describes how to block out sensitive areas on live view and recorded clips.
Covers settings for digital input/output and PTZ camera configurations.
Describes setting up trigger actions for motion detection or I/O triggers.
Covers basic and important network configurations for TCP/IP connection.
Includes settings for date/time, user accounts, firmware version, and system operations.
Configures storage device settings for video and audio recordings.
Allows changing login names and passwords for Administrator and Guest accounts.
Explains how to enable the recording function and related settings.
Describes methods for playing back recorded video files.
Guides on downloading and installing updated firmware for the camera.
Instructions on how to reset camera settings to factory defaults for various camera types.
Guides on changing the login password for GV-IP Camera using GV-IP Device Utility.
Explains how to verify the authenticity of recordings using watermark proof.
Guides on synchronizing and downloading recordings from micro SD cards to a local folder.
Steps to set up the GV-IPCAM H.264 on the GV-System.
Explains how to use Multi View to monitor and manage GV-IPCAM H.264.
Describes how to use the Remote E-Map for monitoring and managing GV-IPCAM H.264.
Explains how Center V2 can monitor and manage cameras and I/O devices.
Describes VSM for monitoring and managing cameras and I/O devices under low bandwidth.
Explains how the Dispatch Server minimizes overloading of Center V2 Servers.
Describes the required security settings for Internet Explorer 8.
Lists compatible lenses for Box Camera models from different providers.
Details the frame rate and performance variations based on connections and bitrates.
Lists supported versions for GV-Backup Center, GV-Video Gateway, and GV-Recording Server.
Provides RTSP protocol commands for audio and video streaming.
Indicates supported power types (DC, AC, PoE) for various camera models.
Lists models supporting 128 MB flash memory and firmware versions.
To Next Page