Need help?Do you have a question about the GeoVision GV-LPR1200 and is the answer not in the manual?
General| Model | GV-LPR1200 |
|---|---|
| Video Compression | H.264, MJPEG |
| Bit Rate | 32 Kbps ~ 16 Mbps |
| ONVIF | Yes |
| Aperture | F1.6 |
| Minimum Illumination | 0.05 Lux (Color) |
| White Balance | Auto |
| Gain Control | Auto |
| Day/Night | Yes (with IR-cut filter) |
| WDR | Yes |
| Image Setting | Brightness, Contrast, Sharpness |
| Audio Compression | G.711 |
| Interface | Ethernet 10/100 Mbps, RJ-45 |
| Protocol | HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, DDNS, RTP, RTSP, RTCP, PPPoE, UPnP, Bonjour, ONVIF |
| Security | HTTPS |
| Local Storage | Micro SD/SDHC/SDXC (up to 128GB) |
| Power | PoE (IEEE 802.3af) / 12V DC |
Overview, features, installation, and connection for the GV-IP LPR Camera 5R.
Features, installation, and connection for the GV-LPC1100 camera.
Features, installation, and connection for GV-LPC1200/LPR1200 cameras.
Features, installation, and connection for the GV-LPC2210 camera.
Features, installation, and connection for GV-LPC2211/2011 cameras.
Configuring video streams, motion detection zones, and sensitivity.
Setting up LAN, TCP/IP, UMTS, IP filtering, and SNMP.
Connecting IP cameras to the GV-System for surveillance and recording.
Connecting IP cameras to the GV-VMS for surveillance and management.
Integrating GV-LPR1200 with GV-ASManager for license plate data.
To Next Page