To Next PageTo Next Page
Need help?Do you have a question about the GeoVision GV-EBD4711 and is the answer not in the manual?
General| Camera Type | Bullet |
|---|---|
| Image Sensor | 1/2.8" progressive scan CMOS |
| Focal Length | 2.8 - 12 mm |
| Network Interface | 10/100 Ethernet |
| Ingress Protection | IP67 |
| Vandal Resistance | IK10 |
| Aperture | F1.4 |
| IR Distance | 30m |
| Compression | H.265, H.264, MJPEG |
| Audio | Yes |
| Audio Compression | G.711 |
| Protocols | TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, NTP, RTSP, RTP, PPPoE, UPnP, IPv4, IPv6, SNMP, QoS, ONVIF |
| Local Storage | MicroSD/SDHC/SDXC (up to 128GB) |
| Power Supply | 12V DC / PoE (IEEE 802.3af) |
| Minimum Illumination | 0.03 Lux |
| Wide Dynamic Range (WDR) | Yes |
| Day/Night | Yes (with IR-cut filter) |
| Lens Type | Motorized varifocal lens |
| Operating Temperature | -30 °C ~ 50 °C (-22 °F ~ 122 °F) |
Introduction to GV-EBD and GV-EBFC5800 Eyeball Dome cameras and their features.
Introduction to GV-ABL/TBL Bullet IP cameras and GV-BLFC5800.
Introduction to GV-ADR/TDR IR Mini Fixed Rugged IP Dome cameras.
Introduction to GV-AVD/TVD Vandal Proof IP Dome cameras.
Introduction to GV-TFD IR Mini Fixed IP Dome cameras.
Introduction to GV-FER5702 IR Fisheye Rugged IP Camera.
Introduction to GV-PTZ5810-IR Indoor network PTZ camera.
Details the necessary hardware and software for camera operation.
Instructions for waterproofing Ethernet cable connections.
Steps for connecting the camera to the network and accessing its interface.
Instructions on how to view the live video feed from the camera.
Controls for Pan, Tilt, and Zoom functions on PTZ cameras.
Guide to accessing and downloading recorded video footage.
General camera settings and configuration shortcuts.
Configuration of network settings like IP, DNS, Ports, and DDNS.
Settings for video streams, resolution, frame rate, and audio.
Configuration of PTZ camera functions like home position and patrol.
Adjustments for image settings like brightness, contrast, OSD, and privacy mask.
Configuration of video analytics like motion detection and face detection.
Setting up alarms for motion, tampering, audio, and input/output events.
Settings for formatting, recording, and backing up data.
User account management and network security settings.
Camera time settings, firmware updates, and maintenance.
Instructions for updating the camera's firmware via Web interface or utility.
How to reset the camera to its original factory default settings.
Guide to integrating IP cameras with GV-DVR/NVR systems.
Guide to connecting and setting up IP cameras with GV-VMS.
Information on RTSP multicast protocol for video/audio streaming.
Details on using RTSP protocol for camera image access.
Information on using HTTP protocol for video and audio streaming.
Lists compatible software versions for GV-VMS/DVR/NVR integration.
Technical drawings and dimensions of various mounting accessories.
Installation instructions for GV-Mount300-2 / 310-2 mounting accessories.
Visual guide for screw placement on different camera models.
Important installation note for fisheye cameras regarding distance.
