To Next PageTo Next Page
Need help?Do you have a question about the GeoVision GV-EBD4813 and is the answer not in the manual?
General| Brand | GeoVision |
|---|---|
| Model | GV-EBD4813 |
| Category | Security Camera |
| Language | English |
Guides on connecting the camera to a network and powering it up.
Guides on finding the camera's IP address and logging into its web interface.
Steps to assign a static IP address to the camera to avoid conflicts.
Instructions on accessing the live camera feed after logging in.
Configuration of IP address, DHCP, PPPoE, IPv6, MTU, and Operating Mode.
Configuration of IP address, DHCP, PPPoE, IPv6, MTU, and Operating Mode.
Modifying default HTTP, HTTPS, and RTSP ports; configuring port mapping.
Setting up email notifications for alarms and snapshot attachments.
Configuring video streams, audio input, and related settings.
Setting video parameters like resolution, frame rate, compression, and quality.
Configuring snapshot settings for alarms, including resolution and interval.
Configuring PTZ settings like basic settings, home position, and control.
Adjusting image settings like brightness, contrast, and exposure.
Adjusting image settings like brightness, contrast, and exposure.
Configuring On-Screen Display for date, time, and custom text.
Setting mask areas to block parts of the camera image for privacy.
Configuring video analytic events for detection and alerts.
Enabling and configuring various smart detection features.
Configuring cross line detection for alarms when objects cross a defined line.
Setting up intrusion detection to trigger alarms when objects enter specific areas.
Configuring object removed detection to trigger alarms when objects disappear from an area.
Setting up object left behind detection for alarms when objects remain in an area.
Enabling defocus detection to trigger alarms when the camera image is out of focus.
Configuring scene change detection to trigger alarms on drastic image changes.
Setting up face detection to capture and send face snapshots to an FTP server.
Configuring people counting to count individuals entering or leaving an area.
Enabling human body detection to generate alarms when figures appear in an area.
Configuring area entry/exit detection for alarms when people or vehicles cross boundaries.
Setting up crowd density monitoring to trigger alarms when people count exceeds a threshold.
Configuring event-based alarms for motion, tampering, audio, and inputs/outputs.
Setting up motion detection to generate alarms when movement occurs in specified areas.
Configuring tampering alarm for detecting physical camera manipulation.
Configuring network security settings like HTTPS, Authentication, ARP Protection.
Procedures for updating the camera's system firmware.
Steps to update camera firmware using the web interface.
Guide to upgrading camera firmware via the GV-IP Device Utility.
Procedures to restore camera settings to factory defaults via web or button.
Step-by-step guide to setting up IP cameras on GV-DVR/NVR.
Manual connection guide for setting up IP cameras on GV-VMS.
