3.9.2 Network Security
There are five types of network security settings: HTTPS, Authentication, ARP Protection,
IP Address Filtering and Access Policy.
HTTPS
You can enable the Hypertext Transfer Protocol Secure (HTTPS) settings to access the
camera through a secure protocol. Click On to enable, and optionally click Browse to locate
an SSL certificate from your local computer and click Upload.
Figure 3-69
Authentication
RTSP (Real Time Streaming Protocol) and HTTP (Hypertext Transfer Protocol) are different
application layer protocols for transmitting video. Set the Authentication mode for RTSP
streaming or HTTP streaming.
Figure 3-70
For RTSP command, see Appendix B.
For HTTP command, see Appendix C.
To Next Page
