Need help?Do you have a question about the GeoVision GV-SNVR and is the answer not in the manual?
General| Operating System | Embedded Linux |
|---|---|
| Video Output | HDMI, VGA |
| Network Interface | Gigabit Ethernet |
| USB Ports | USB 2.0 |
| Remote Viewing | Yes |
| Protocols | TCP/IP, HTTP, HTTPS, DHCP, DNS, DDNS, PPPoE, SMTP, NTP, UPnP, RTSP, RTP, UDP, ICMP, IGMP |
| Video Compression | H.264, H.265, MJPEG |
| Hard Drive Capacity | Supports up to 10TB per HDD |
| Channels | 16 |
Lists the various GV-SNVR models covered by this manual.
Important safety note regarding indoor use only.
Details the capabilities and functionalities of the GV-SNVR system.
Provides an overview of the different GV-SNVR models and their specifications.
Lists the items included in the GV-SNVR package.
Provides front and rear views of various GV-SNVR models.
Lists supported GV-IP cameras and required system configurations.
Describes optional devices that enhance GV-SNVR capabilities.
Step-by-step guide for installing the hard drive into various GV-SNVR models.
Instructions for connecting the GV-SNVR unit to power, network, and devices.
Procedure for formatting the installed hard drive before use.
Guides on automatically and manually adding IP cameras to the GV-SNVR system.
Explains the main interface elements and functions of the GV-SNVR.
Covers live view, snapshots, audio, PTZ, and fisheye dewarping.
Configure settings for GV-IP and third-party cameras.
Configure recording modes and schedules for connected cameras.
Setup for LAN, WAN, Wi-Fi, DDNS, and Web Server.
Manage hard drive storage and formatting.
Adjust how the GV-SNVR interface is displayed.
Connect to monitoring stations like GV-Center V2 and GV-Eye.
Manage device name, time, logs, and user accounts.
Detailed instructions for using the timeline player to view recordings.
Steps to export recorded video files to a USB flash drive.
Access live view and configure settings using a web browser.
Connect and manage GV-SNVR remotely using the SNVR Viewer application.
Monitor live views and take snapshots using the GV-Eye mobile app.
Connect to GV-SNVR for live view and playback using GV-Edge Manager.
Connect to GV-SNVR for live view and playback using GV-Control Center.
Access live view of GV-SNVR using RTSP protocol.
Procedure to upgrade the GV-SNVR system firmware using a USB drive.
Save and restore GV-SNVR configurations using a USB flash drive.
Utility for IP address lookup, firmware upgrade, and settings management.
List of tested hard disk drive models compatible with GV-SNVR.
Default streaming settings for local display and web browser access.
Specifications for supported stream resolutions for various GV-SNVR models.
To Next Page
