To Next PageTo Next Page
Need help?Do you have a question about the GeoVision GV-TDR4700 Series and is the answer not in the manual?
General| Model | GV-TDR4700 Series |
|---|---|
| Category | Security Camera |
| Image Sensor | 1/2.8" progressive scan CMOS |
| Digital Noise Reduction (DNR) | 3D DNR |
| Ingress Protection | IP67 |
| Vandal Resistance | IK10 |
| Image Compression | H.265 / H.264 / MJPEG |
| Day/Night | Yes |
| IR Distance | Up to 30m |
| Wide Dynamic Range (WDR) | 120dB |
| Audio | Built-in Microphone |
| Local Storage | MicroSD/SDHC/SDXC |
| Ethernet | 10/100 Mbps |
| Power | PoE / DC 12V |
| Network | Ethernet |
| Remote Viewing | Yes |
| Mobile Support | Yes (iOS & Android) |
| Operating System | Embedded Linux |
Details on GV-EBD Eyeball Dome and GV-EBFC5800 cameras, including specifications and features.
Lists the components included in the standard package for GV-EBD series cameras.
Information on optional accessories available to expand camera capabilities and versatility.
Provides a visual overview of the GV-EBD2702/2704/4700/4701/4704/8700/8800 and GV-EBFC5800 models.
Detailed overview of specific GV-EBD and GV-EBFC camera models, highlighting key components and features.
Overview of GV-EBD4711/4712/4813/8711/8813 models, focusing on motorized varifocal lens features.
Instructions for installing the GV-EBD Target Eyeball Dome camera, covering ceiling mount options.
Step-by-step guide for the standard installation of specific GV-EBD and GV-EBFC camera models.
Detailed installation instructions for GV-EBD4711/4712/4813/8711/8813 models.
Information on optional mounting accessories for GV-EBD series cameras.
Details and packing list for the GV-Mount211P wall mount accessory.
Lists the components included in the standard package for GV-ABL/TBL and GV-BLFC5800 cameras.
Information on optional accessories for GV-ABL/TBL and GV-BLFC5800 cameras.
General overview of GV-ABL/TBL and GV-BLFC5800 Bullet IP Cameras.
Overview of specific GV-ABL/TBL models, detailing connectors and features.
Overview of other GV-ABL/TBL/BLFC models, detailing connectors and features.
Instructions for installing GV-ABL/TBL and GV-BLFC5800 Bullet IP Cameras.
Information on optional mounting accessories for GV-ABL/TBL and GV-BLFC5800 cameras.
Details and packing list for the GV-Mount502 wall mount accessory.
Details and packing list for the GV-Mount503 wall mount accessory.
Instructions for installing GV-Mount420 with GV-Mount503 for pole mounting.
Details and packing list for the GV-Mount504 wall mount accessory.
Lists the components included in the standard package for GV-ADR/TDR cameras.
Information on optional accessories for GV-ADR/TDR cameras.
General overview of GV-ADR/TDR Mini Fixed Rugged IP Dome cameras.
Overview of specific GV-AVD/TVD models, detailing connectors and wire definitions.
Instructions for installing GV-ADR/TDR cameras, covering ceiling mount options.
Information on optional mounting accessories for GV-ADR/TDR cameras.
Details and packing list for the GV-Mount213 wall/ceiling box mount accessory.
Lists the components included in the standard package for GV-AVD/TVD cameras.
Packing list specific to the GV-TVD4711 IR Vandal Proof IP Dome camera.
Packing list for the general GV-AVD/TVD series IR Vandal Proof IP Dome cameras.
Information on optional accessories for GV-AVD/TVD cameras.
General overview of GV-AVD/TVD Vandal Proof IP Dome cameras.
Overview of specific GV-AVD/TVD models, detailing connectors and features.
Overview of the GV-TVD4711 camera, detailing ports and power supply options.
Instructions for installing GV-AVD/TVD cameras, covering ceiling mount options.
Standard ceiling mount installation for specific GV-AVD/TVD models.
Standard ceiling mount installation for the GV-TVD4711 camera.
Information on optional mounting accessories for GV-AVD/TVD cameras.
Details and packing list for the GV-Mount211-2 wall mount accessory.
Details and packing list for the GV-Mount212-2 ceiling box mount accessory.
Instructions for installing GV-Mount420 with GV-Mount211-2 for pole mounting.
Details and packing list for the GV-Mount606 in-ceiling mount accessory.
Lists the components included in the standard package for GV-TFD cameras.
Information on optional accessories for GV-TFD cameras.
General overview of GV-TFD Mini Fixed IP Dome cameras.
Overview of the GV-TFD4700 camera, detailing ports and power options.
Instructions for installing GV-TFD cameras, covering ceiling mount options.
Standard ceiling mount installation for the GV-TFD4700 camera.
Information on optional installations for GV-TFD cameras.
Lists the components included in the standard package for the GV-FER5702 camera.
Information on optional accessories for the GV-FER5702 camera.
General overview of the GV-FER5702 IR Fisheye Rugged IP Camera.
Overview of the GV-FER5702 camera, detailing connectors and features.
Instructions for installing the GV-FER5702 camera, covering ceiling mount options.
Information on optional mounting accessories for the GV-FER5702 camera.
Lists the components included in the standard package for the GV-PTZ5810-IR camera.
Information on optional accessories for the GV-PTZ5810-IR camera.
General overview of the GV-PTZ5810-IR Indoor Network PTZ Camera.
Overview of the GV-PTZ5810-IR camera, detailing connectors and features.
Instructions for installing the GV-PTZ5810-IR camera, covering ceiling mount options.
Information on optional mounting accessories for the GV-PTZ5810-IR camera.
Basic steps to connect the IP camera to the network and access its interface.
Guide to finding the camera's IP address using GV-IP Device Utility and logging in.
Steps to assign a static IP address to the camera to avoid conflicts.
How to view the live video stream from the camera after logging in.
Instructions on using the digital zoom feature to magnify parts of the live image.
How to start and stop video recording on the camera's local storage.
Guide to controlling the camera's Pan, Tilt, and Zoom functions.
Steps to access the PTZ control interface from the live view.
How to create, save, and go to preset camera positions for PTZ control.
Instructions for setting up patrol routes by defining camera movement between presets.
How to play back recorded videos stored locally on the camera's SD card.
Steps to download recorded video files from the camera's local storage.
General camera settings and shortcuts for configuration pages.
View current camera status and access common configuration pages.
Configure local parameters for the PC, including smart settings.
Configure network settings, ports, FTP server, and email notifications.
Configure IP address, subnet mask, gateway, and DNS settings.
Set up preferred and alternate DNS servers for network resolution.
Modify default HTTP, HTTPS, and RTSP ports for network access.
Configure Dynamic Domain Name System for accessing the camera via a dynamic IP.
Configure email settings to send alerts and snapshots upon triggered events.
Configure SNMP protocol for device management and integration.
Configure IEEE 802.1x for port-based network access control.
Configure Quality of Service (QoS) to prioritize network traffic.
Configure video streams, audio input, and related settings.
Set video parameters like resolution, frame rate, codec, and image quality.
Configure snapshot settings for capturing images upon alarm triggers.
Configure audio input and output settings for audio-enabled cameras.
Configure Region of Interest (ROI) to prioritize image quality in specific areas.
Configure media stream settings for transmitting video via UDP or TCP.
Configure PTZ settings including basic settings, home position, and remote control.
Configure basic PTZ settings like power off memory and timeout.
Set the camera's home position and idle state for PTZ operation.
Set PTZ limitations to prevent the camera from hitting obstacles.
Configure settings for connecting a third-party PTZ remote control program.
Configure patrol routes and snapshot settings for PTZ cameras.
Manually set the camera's north direction or home position.
Configure image settings, OSD, and privacy mask.
Adjust image settings like brightness, exposure, IR illumination, and white balance.
Adjust brightness, contrast, sharpness, and noise reduction for image quality.
Configure exposure mode, shutter speed, gain, and metering control.
Configure IR illumination modes and settings for day/night vision.
Adjust white balance settings to correct color temperature in images.
Configure On-Screen Display (OSD) for text, date, and time on video.
Set privacy masks to block specific areas of the camera image.
Configure video analytics events like motion detection and face detection.
Configure alerts for video analytic events like Cross Line, Intrusion, and Face Detection.
Configure cross line detection to generate alarms when objects cross a defined line.
Configure intrusion detection to generate alarms when objects enter a defined area.
Configure object removed detection to alert when an object disappears from an area.
Configure object left behind detection to alert when an object remains in an area.
Configure defocus detection to alert when the camera's image is out of focus.
Configure scene change detection to alert on drastic changes in the camera's image.
Configure face detection to capture and store snapshots of detected faces.
Configure people counting to track individuals entering/exiting a specified area.
Configure human body detection to generate alarms for human figures in specified areas.
Configure area detection to alert when people or vehicles enter/leave defined zones.
Configure crowd density monitoring to alert when people count exceeds thresholds.
Configure advanced settings for snapshot clarity and detection modes.
Configure alarms for motion detection, tampering, audio, and linkage events.
Configure motion detection to generate alarms when movement occurs in specified areas.
Configure tampering alarm to detect physical tampering of the camera.
Configure audio detection to alert on abnormal audio volume levels.
Configure alarm inputs to receive external alarm signals.
Configure alarm outputs to trigger external devices upon alarms.
Disable alarms or email alerts for a specified period.
Configure storage settings, including memory card formatting and FTP server.
Format the memory card for recording and snapshot storage.
Configure FTP server settings to upload snapshots from the camera.
Back up existing videos and snapshots to a local PC.
Create user accounts and configure network security settings.
Manage Administrator and Common User accounts.
Configure network security settings including HTTPS, Authentication, and ARP.
Enable secure HTTPS access to the camera and upload SSL certificates.
Set authentication modes for RTSP and HTTP streaming.
Configure ARP protection to safeguard the camera from ARP attacks.
Configure IP address filtering to allow or deny access from specific IP addresses.
Configure access policy, including illegal login lock duration.
Set camera time and update system firmware.
Adjust system time, time zone, and daylight saving time settings.
Quickly access FTP settings page and complete storage configuration.
Upgrade firmware, restart camera, and backup/import configurations.
Examine network environment and troubleshoot connectivity issues.
Inquire configurations made on camera and export log information.
Exchange data with third-party devices via RS485 serial port.
Instructions on how to upgrade camera firmware using Web interface or GV-IP Device Utility.
Steps to update camera firmware through the Web interface.
Steps to upgrade camera firmware using the GV-IP Device Utility software.
How to restore camera settings to factory defaults via Web interface or Default Button.
Steps to set up IP cameras for recording and management on GV-DVR/NVR.
Steps to manually connect IP cameras to the GV-VMS for video management.
Information on RTSP multicast, RTSP, and HTTP protocols for video streaming.
Lists compatible GV-VMS/DVR/NVR versions for various camera models.
Illustrations and dimensions of various GV-Mount accessories.
Diagrams showing screw positions for mounting different camera models.
