Need help?Do you have a question about the GeoVision GV-VD220D and is the answer not in the manual?
General| Camera Type | Dome |
|---|---|
| Maximum Resolution | 1920 x 1080 |
| IR LED | Yes |
| Digital Noise Reduction (DNR) | 3D DNR |
| Audio Compression | G.711 |
| Vandal Resistance | IK10 |
| Onvif Support | Yes |
| Frame Rate | 30fps |
| Minimum Illumination | 0.03 Lux (Color), 0 Lux (B/W with IR LED) |
| Day/Night | Yes (IR-cut filter) |
| IR Distance | 30m |
| Video Compression | H.264, MJPEG |
| Audio | Yes (Built-in Microphone) |
| Ethernet | 10/100 Ethernet |
| Protocols | HTTP, HTTPS, SMTP, FTP, DHCP, DDNS, NTP, RTSP, RTP, RTCP, UDP |
| Local Storage | MicroSD card slot |
| Power Supply | DC12V, PoE (802.3af) |
Device compliance with Part 15 of the FCC Rules regarding interference.
UL certification details, including battery information for RTC.
Instructions for firmware upgrade, including backup and re-formatting.
PC and browser requirements for GV-IPCAM H.264 operations.
List of items included in the Box Camera package.
Overview of key features of the Box Camera.
Physical overview and component identification for specific Box Camera models.
Step-by-step instructions for connecting the camera to a network and power.
Details on optional accessories for cameras.
Details on the I/O terminal block for the Box Camera.
List of items included in the Ultra Box Camera package.
Overview of key features of the Ultra Box Camera.
Physical overview and component identification for the Ultra Box Camera.
Step-by-step instructions for installing the Ultra Box Camera.
Instructions for connecting the Ultra Box Camera to network and power.
List of items included in the Target Box Camera package.
Overview of key features of the Target Box Camera.
Physical overview and component identification for the Target Box Camera.
Step-by-step instructions for installing the Target Box Camera.
Instructions for connecting the Target Box Camera to network and power.
List of items included in the IR Arctic Box Camera package.
Overview of key features of the IR Arctic Box Camera.
Physical overview and component identification for the IR Arctic Box Camera.
Step-by-step instructions for installing the IR Arctic Box Camera.
Instructions for connecting the IR Arctic Box Camera to power and network.
Important notices and configuration for IR LED function.
List of items included in the Mini Fixed Dome/Rugged Dome package.
Overview of key features for Mini Fixed Dome and Rugged Dome cameras.
Physical overview and component identification for Mini Fixed Dome and Rugged Dome.
Step-by-step instructions for installing Mini Fixed Dome and Rugged Dome cameras.
Instructions for connecting Mini Fixed Dome and Rugged Dome cameras.
List of items included in the Target Mini Fixed Dome package.
Overview of key features of the Target Mini Fixed Dome.
Physical overview and component identification for the Target Mini Fixed Dome.
Step-by-step instructions for installing the Target Mini Fixed Dome.
Instructions for connecting the Target Mini Fixed Dome to power and network.
List of items included in the Target Mini Fixed Rugged Dome package.
Overview of key features of the Target Mini Fixed Rugged Dome.
Physical overview and component identification for the Target Mini Fixed Rugged Dome.
Step-by-step instructions for installing the Target Mini Fixed Rugged Dome.
List of items included in the Bullet Camera package.
Overview of key features of the Bullet Camera.
Physical overview and component identification for the Bullet Camera.
Step-by-step instructions for installing the Bullet Camera.
List of items included in the Ultra Bullet Camera package.
Overview of key features of the Ultra Bullet Camera.
Physical overview and component identification for the Ultra Bullet Camera.
Step-by-step instructions for installing the Ultra Bullet Camera.
List of items included in the Target Bullet Camera package.
Overview of key features of the Target Bullet Camera.
Physical overview and component identification for the Target Bullet Camera.
Step-by-step instructions for installing the Target Bullet Camera.
Instructions for connecting the Target Bullet Camera to power and network.
List of items included in the PTZ Camera package.
Overview of key features of the PTZ Camera.
Physical overview and component identification for the PTZ Camera.
Step-by-step instructions for installing the PTZ Camera.
Instructions for connecting the PTZ Camera to network and power.
Procedure for adjusting the focus for optimal image clarity.
Details on the pin assignment for the I/O terminal block.
Overview of the PTZ control panel and its functions.
List of items included in the PT Camera package.
Overview of key features of the PT Camera.
Physical overview and component identification for the PT Camera.
Installation procedures for the GV-PT Camera.
Instructions for connecting the GV-PT Camera.
Procedure for adjusting focus for image clarity.
Pin assignment details for the I/O terminal block.
Overview of supported PT functions and references.
List of items included in the Vandal Proof IP Dome package.
Overview of key features of the Vandal Proof IP Dome.
Physical overview and component identification for the Vandal Proof IP Dome.
Step-by-step instructions for installing the Vandal Proof IP Dome.
Instructions for connecting the Vandal Proof IP Dome to power and network.
List of items included in the Vandal Proof IP Dome (Part II) package.
Overview of key features of the Vandal Proof IP Dome (Part II).
Physical overview and component identification for the Vandal Proof IP Dome (Part II).
Step-by-step instructions for installing the Vandal Proof IP Dome (Part II).
Instructions for connecting the Vandal Proof IP Dome (Part II) to power and network.
List of items included in the Fixed IP Dome package.
Overview of key features of the Fixed IP Dome.
Physical overview and component identification for the Fixed IP Dome.
Step-by-step instructions for installing the Fixed IP Dome.
Instructions for connecting the Fixed IP Dome to network and power.
Details on the I/O terminal block for the Fixed IP Dome.
List of items included in the Cube Camera package.
Overview of key features of the Cube Camera.
Physical overview and component identification for the Cube Camera.
Step-by-step instructions for installing the Cube Camera.
Instructions for connecting the Cube Camera to power and network.
List of items included in the Advanced Cube Camera package.
Overview of key features of the Advanced Cube Camera.
Physical overview and component identification for the Advanced Cube Camera.
Step-by-step instructions for installing the Advanced Cube Camera.
Instructions for connecting the Advanced Cube Camera to power and network.
Steps to access the live view of the camera.
Procedures for adjusting image clarity and focus.
Basic configuration settings after installation.
Steps to access the camera's live view and surveillance images.
Overview of functions available on the main page and live view window.
Configuration of video and motion detection settings.
Configuration of Input/Output (I/O) settings.
Configuration of events and alerts, including email and FTP notifications.
Settings for monitoring motion detection and I/O events.
Configuration of recording schedules for video and I/O monitoring.
Functionality for remote playback of recorded files.
Configuration of network settings, including LAN and wireless.
Management settings including date, time, user accounts, and system operations.
Instructions on how to enable and configure recording functions.
Methods for playing back recorded video files.
Procedures for upgrading the camera's system firmware.
Steps to back up and restore camera configurations.
Instructions for restoring camera settings to factory defaults.
Steps to change the login password for the camera.
Procedure for verifying video watermark for authenticity.
Steps for downloading videos from the micro SD card.
Steps to set up an IP camera on the GV-System.
Instructions for setting up remote monitoring with Multi View.
Steps to create an E-Map for remote monitoring.
Settings for connecting to the Center V2 central monitoring station.
Settings for connecting to the VSM central monitoring station.
Configuration for the Dispatch Server to manage Center V2 servers.
Specific settings required for Internet Explorer 8 compatibility.
List of supported lenses for Box Camera models.
Table detailing supported resolutions and frame rates for various cameras.
To Next Page
